MINTS DREAM V2
Dheerajsom·MINTS_DREAM_V2
About the MINTS DREAM V2 PCB
MINTS DREAM V2 is an open source PCB design by Dheerajsom, published on GitHub under the MIT license. It is a 2-layer board measuring 79 × 78.9 mm, with 33 components from 21 distinct parts.
Other key parts include the TGS2611-C00, AP2112K-3.3, BME280 and INA219BXDCN. By type, the board carries 8 connectors, 8 resistors, 7 capacitors, 4 ICs, 3 jumpers and 1 transistor.
It belongs with the sensors and dev boards & breakouts designs in this gallery.
From the project
Raspberry Pi carrier board for the MINTS-AI environmental sensing nodes.
Dream V2.0 is a Raspberry Pi carrier board for the MINTS-AI environmental sensing nodes. It plugs onto the Pi's 40-pin GPIO header and brings together air-quality sensors, power monitoring and Qwiic expansion ports on a single board, so a full sensing node can be built from a Pi, this PCB and a few off-the-shelf sensor modules.
- Gas and climate sensing – an on-board Bosch BME280 (temperature, humidity, pressure) and a footprint for the Figaro TGS2611-C00 methane sensor. - CO₂ sensing – a 10-pin header (J5) and outline for a COZIR CO₂ sensor, plus a UART Qwiic port (J6) for it. - Particulate…

Main components on the MINTS DREAM V2
MINTS DREAM V2 bill of materials (BOM)
33 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TGS2611-C00 | TGS2611-C00_FGS | IC1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | INA219BXDCN INA219BxDCN | SOT-23-8 | U3 |
| 1 | BSS138 | SOT-363 | Q1 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 5 | Qwiic_Vertical | JST_SMD_1.0mm-4_Vertical_Black | J2, J4, J6, J8, J9 |
| 1 | 679305124022 | 679305124022 | J3 |
| 1 | M20-7830542 | M20-7830542 | J5 |
| 3 | ~ | Jumper_2_NO | JP1, JP2, JP3 |
| 1 | AB11AH-FC NKK236 | SWITCH_NK236_APM | S1 |
| 1 | WS2812B_5050 | WS2812_5050-4Pin | D1 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C1, C5, C6 |
| 3 | 10UF 10uF | C_0805_2012Metric | C2, C3, C4 |
| 1 | EEV107M010S9GAA | EEV107M010S9GAA | C7 |
| 2 | 10K 10k | R_Array_Convex_4x0603 | R1, R5 |
| 2 | 10K 10k | R_0603_1608Metric | R2, R3 |
| 1 | PT2512FK-070R1L | PT2512FK-070R1L | R4 |
| 1 | RC0603FR-075K1L | RC0603N_YAG-L | R6 |
| 1 | RC0603FR-075K1L | R_0603_1608Metric | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0603FR-07330RL | RC0603FR-07330RL | R8 |
MINTS DREAM V2 design files
The KiCad project lives in the Dheerajsom/MINTS_DREAM_V2 repository on GitHub; these links point at the commit this page was built from.
- LayoutdreamV2.kicad_pcb
- SchematicdreamV2.kicad_sch
- BOMdreamV2_0_BOM.csv
MINTS DREAM V2: common questions
How big is the MINTS DREAM V2 PCB?
The MINTS DREAM V2 measures 79 × 78.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MINTS DREAM V2?
33 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MINTS DREAM V2 design files?
From the Dheerajsom/MINTS_DREAM_V2 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MINTS DREAM V2 design in my own project?
Yes, under the terms of its MIT license, which Dheerajsom chose for the repository.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2k