2 open source boards using the TGS2611-C00

Real designs built with the TGS2611-C00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The TGS2611-C00 in open source designs

The gallery holds 2 open source boards using the TGS2611-C00 from 2 GitHub repositories; a typical one measures about 77 × 77 mm and carries around 32 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MINTS DREAM V2 by Dheerajsom.

Parts used alongside the TGS2611-C00

What boards using the TGS2611-C00 are built for

TGS2611-C00: common questions

Where can I find a TGS2611-C00 reference design?

Each of the 2 boards on this page is a real design using the TGS2611-C00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How big is a typical board using the TGS2611-C00?

The median is 77 × 77 mm, and 100% are two-layer designs.

What is the most popular open source board using the TGS2611-C00?

By GitHub stars, MINTS DREAM V2 by Dheerajsom, with 0 stars.

Can I simulate one of these boards using the TGS2611-C00 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part