Custom-ESP32-C3-mini-Microcontroller
diaseanodarren-hash·Custom-ESP32-C3-mini-Microcontroller
About the Custom-ESP32-C3-mini-Microcontroller PCB
Custom-ESP32-C3-mini-Microcontroller is an open source ESP32 PCB design by diaseanodarren-hash, published on GitHub. It is a 4-layer board measuring 29.8 × 35.1 mm, with 29 components from 16 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the USBLC6-2SC6 and AP2112K-3.3. By type, the board carries 10 capacitors, 9 resistors, 3 ICs, 3 connectors, 2 switches and 1 crystal.
It belongs with the iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Designed a custom ESP32-C3-mini microcontroller development board from schematic capture and footprint creation to final PCB layout and trace routing.
MCU Core: ESP32-C3 single-core 32-bit RISC-V processor (up to 160 MHz). Connectivity: Integrated 2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE). Power & Interfaces: USB-C interface for power delivery and UART/programming. Low-dropout (LDO) regulator for stable 3.3V rail step-down. ESD protection on data lines and ESD-aware ground layout. Peripherals Exposed: GPIO, I2C, SPI, UART, and ADC pin headers. Form Factor: Compact 4-layer PCB footprint optimized for breadboard and enclosure integration.

Main components on the Custom-ESP32-C3-mini-Microcontroller
Custom-ESP32-C3-mini-Microcontroller bill of materials (BOM)
29 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U2 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U3 |
| 1 | Crystal | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 2 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | SW_SPST_B3U-1000P | SW1, SW2 |
| 1 | PESD5V0L1ULD | D_SOD-882D | D1 |
| 5 | 4U7 4u7 | C_0805_2012Metric | C1, C2, C3, C4, C5 |
| 3 | 100N 100n | C_0402_1005Metric | C6, C9, C10 |
| 2 | TBD | C_0201_0603Metric | C7, C8 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R1, R2 |
| 1 | 0r | R_0805_2012Metric | R3 |
| 1 | TBD | R_0201_0603Metric | R4 |
| 4 | 10K | R_0402_1005Metric | R5, R7, R8, R9 |
| 1 | 100R | R_0402_1005Metric | R6 |
Custom-ESP32-C3-mini-Microcontroller design files
The KiCad project lives in the diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller repository on GitHub; these links point at the commit this page was built from.
Custom-ESP32-C3-mini-Microcontroller: common questions
What microcontroller does the Custom-ESP32-C3-mini-Microcontroller use?
The Custom-ESP32-C3-mini-Microcontroller is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the Custom-ESP32-C3-mini-Microcontroller PCB?
The Custom-ESP32-C3-mini-Microcontroller measures 29.8 × 35.1 mm, has 4 copper layers and is 1 mm thick.
How many components are on the Custom-ESP32-C3-mini-Microcontroller?
29 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Custom-ESP32-C3-mini-Microcontroller design files?
From the diaseanodarren-hash/Custom-ESP32-C3-mini-Microcontroller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Custom-ESP32-C3-mini-Microcontroller design in my own project?
The repository has no license, so all rights stay with diaseanodarren-hash. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Custom-ESP32-C3-mini-Microcontroller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k