2S Li ion BMS

diegoharroyo·kicad-bms-2s-i2s-mic·bms/bms_2s.kicad_pcb

2S Li ion BMS PCB layout, top view — open source board by diegoharroyo

About the 2S Li ion BMS PCB

2S Li ion BMS is an open source PCB design by diegoharroyo, published on GitHub under the MIT license. It is a 2-layer board measuring 44 × 30 mm, with 17 components from 10 distinct parts.

Other key parts include the TPS7A2033PDBVR and PCM1820. By type, the board carries 7 resistors, 6 capacitors, 2 ICs and 2 transistors.

It belongs with the power & battery, audio and sensors designs in this gallery.

From the project

2S Li-ion BMS and I2S MEMS microphone board in KiCad, assembled by JLCPCB: schematics, layouts, gerbers/BOM/CPL, ERC/DRC and scripted design checks

Two small boards from a device I designed and built: a protection board for a 2-cell lithium-ion pack, and a microphone board that connects to a Raspberry Pi-class host over I2S. Both were assembled by JLCPCB from these design files and have been running in a working unit since October 2026.

For each board you get the KiCad schematic and layout, JLCPCB gerbers, BOM and placement files, the ERC/DRC reports, and a script that checks the schematic connection by connection. The BMS also has a script that redoes its design math (thresholds, MOSFET temperatures, balancing, standby current) against…

2S Li ion BMS, from the project README
From the project README

Main components on the 2S Li ion BMS

2S Li ion BMS bill of materials (BOM)

17 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS7A2033PDBVR
HY2120-CB
U1
1
PCM1820
BQ29200DRBR
U2
2
CSD17578Q3A
Q1, Q2
1
10U
100n
C1
4
100n
C2, C4, C5, C6
1
100N
100n
C3
4
330
R1, R2, R4, R5
1
2k
R3
1
120
R6
1
100
R7

2S Li ion BMS design files

The KiCad project lives in the diegoharroyo/kicad-bms-2s-i2s-mic repository on GitHub; these links point at the commit this page was built from.

2S Li ion BMS: common questions

How big is the 2S Li ion BMS PCB?

The 2S Li ion BMS measures 44 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 2S Li ion BMS?

17 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 2S Li ion BMS design files?

From the diegoharroyo/kicad-bms-2s-i2s-mic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 2S Li ion BMS design in my own project?

Yes, under the terms of its MIT license, which diegoharroyo chose for the repository.

More boards in kicad-bms-2s-i2s-mic

Similar boards