I2S MEMS microphone board
diegoharroyo·kicad-bms-2s-i2s-mic·audio/i2s_mic.kicad_pcb
About the I2S MEMS microphone board
I2S MEMS microphone board is an open source PCB design by diegoharroyo, published on GitHub under the MIT license. It is a 2-layer board measuring 24 × 24 mm, with 20 components from 9 distinct parts.
Other key parts include the TPS7A2033PDBVR and PCM1820. By type, the board carries 14 capacitors, 2 ICs, 2 resistors, 1 connector and 1 microphone.
It belongs with the power & battery, audio and sensors designs in this gallery.
From the project
2S Li-ion BMS and I2S MEMS microphone board in KiCad, assembled by JLCPCB: schematics, layouts, gerbers/BOM/CPL, ERC/DRC and scripted design checks
Two small boards from a device I designed and built: a protection board for a 2-cell lithium-ion pack, and a microphone board that connects to a Raspberry Pi-class host over I2S. Both were assembled by JLCPCB from these design files and have been running in a working unit since October 2026.
For each board you get the KiCad schematic and layout, JLCPCB gerbers, BOM and placement files, the ERC/DRC reports, and a script that checks the schematic connection by connection. The BMS also has a script that redoes its design math (thresholds, MOSFET temperatures, balancing, standby current) against…

Main components on the I2S MEMS microphone board
I2S MEMS microphone board bill of materials (BOM)
20 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A2033PDBVR | SOT-23-5 | U1 |
| 1 | PCM1820 | Texas_RTE0020A_WQFN-20-1EP_3x3mm_P0.5mm_EP1.4x1.4mm | U2 |
| 1 | PZ254-2-03-WS Host 2x3 | HCTL_PZ254-2-03-WS_2x03_P2.54mm_Horizontal_SMD | J1 |
| 1 | ICS-40730 | TDK_ICS-40730_LGA-4_4.72x3.76mm | MK1 |
| 4 | 10U 10u | C_0805_2012Metric | C1, C8, C11, C14 |
| 5 | 1u | C_0805_2012Metric | C2, C4, C5, C6, C10 |
| 5 | 100N 100n | C_0603_1608Metric | C3, C7, C9, C12, C13 |
| 1 | 10 | R_0603_1608Metric | R1 |
| 1 | 1k | R_0603_1608Metric | R2 |
I2S MEMS microphone board design files
The KiCad project lives in the diegoharroyo/kicad-bms-2s-i2s-mic repository on GitHub; these links point at the commit this page was built from.
I2S MEMS microphone board: common questions
How big is the I2S MEMS microphone board?
The I2S MEMS microphone board measures 24 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the I2S MEMS microphone board?
20 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the I2S MEMS microphone board design files?
From the diegoharroyo/kicad-bms-2s-i2s-mic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the I2S MEMS microphone board design in my own project?
Yes, under the terms of its MIT license, which diegoharroyo chose for the repository.
More boards in kicad-bms-2s-i2s-mic
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kEinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k