Space-Pet-Starbie

digdoyboy2-commits·Space-Pet-Starbie

Space-Pet-Starbie PCB layout, top view — open source ESP32 board by digdoyboy2-commits

About the Space-Pet-Starbie PCB

Space-Pet-Starbie is an open source ESP32 PCB design by digdoyboy2-commits, published on GitHub. It is a 2-layer board measuring 109.5 × 86.5 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

Starbie — An interactive ESP32-C3 powered pet featuring an OLED display, MPU6050 motion tracking, and a DHT11 environmental sensor. Built with KiCad & Arduino IDE.

A Starbie is an interactive pet powered by a XIAO ESP32-C3 microcontroller. It features an OLED display for expressions, an MPU6050 6-axis IMU for motion tracking, and a DHT11 sensor for temperature and humidity monitoring.

Features & Hardware - MCU: XIAO ESP32-C3 - Display:OLED Display (SSD1306) - Sensors: MPU6050 IMU & DHT11 Temp/Humidity Sensor - Custom PCB Designed in KiCad I changed up the design and made my own theme.

Space-Pet-Starbie, from the project README
From the project README

Main components on the Space-Pet-Starbie

Space-Pet-Starbie bill of materials (BOM)

7 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
CONN_01X08_PIN
Conn_01x08_Pin
J1
1
CONN_01X04_PIN
Conn_01x04_Pin
J2
2
SW_Push
SW1, SW2
1
10K
10k
R1

Space-Pet-Starbie design files

The KiCad project lives in the digdoyboy2-commits/Space-Pet-Starbie repository on GitHub; these links point at the commit this page was built from.

Space-Pet-Starbie: common questions

What microcontroller does the Space-Pet-Starbie use?

The Space-Pet-Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Space-Pet-Starbie PCB?

The Space-Pet-Starbie measures 109.5 × 86.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Space-Pet-Starbie?

7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Space-Pet-Starbie design files?

From the digdoyboy2-commits/Space-Pet-Starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Space-Pet-Starbie design in my own project?

The repository has no license, so all rights stay with digdoyboy2-commits. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Space-Pet-Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards