Riscduino board
About the Riscduino board
Riscduino board is an open source PCB design by dineshannayya, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 92.5 × 93.8 mm, with 49 components from 19 distinct parts.
Other key parts include the AMS1117, NUCLEO144-F746ZG, W25Q32FVSS and caravel_breakout. By type, the board carries 18 resistors, 7 connectors, 6 ICs, 6 diodes, 6 capacitors and 4 test points.
From the project
Host all the MPW Bring-up related Enviornment
Main components on the Riscduino board
Riscduino board bill of materials (BOM)
49 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | AMS1117 | SOT-223-3_TabPin2 | U1, U2 |
| 1 | NUCLEO144-F746ZG | ST_Morpho_Connectors_144 | U3 |
| 2 | W25Q32FVSS | SOIC127P790X216-8N | U4, U6 |
| 1 | caravel_breakout | caravel_breakout_flexy_rev3D | U5 |
| 2 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | J1, J4 |
| 1 | Conn_01x06_Female | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x11_Female | PinHeader_1x11_P2.54mm_Vertical | J5 |
| 2 | HTSW-120-08-F-D | SAMTEC_HTSW-120-08-F-D | P1, P2 |
| 1 | 10KP | TRIM_T73YU103KT20 | RV1 |
| 1 | 10KPot | TRIM_T73YU103KT20 | RV2 |
| 4 | TestPoint | TestPoint_Bridge_Pitch2.54mm_Drill1.0mm | TP1, TP2, TP3, TP4 |
| 6 | LED | LED_1206_3216Metric | D1, D2, D3, D4, D5, D6 |
| 2 | 22uF | CP_Radial_D6.3mm_P2.50mm | C1, C3 |
| 4 | 0.1uf - CC0805KRX7R9BB104 | C_1206_3216Metric | C2, C4, C5, C6 |
| 2 | 330Ohm | R_1206_3216Metric | R1, R3 |
| 2 | R | R_1206_3216Metric | R2, R12 |
| 2 | 180Ohm | R_1206_3216Metric | R4, R5 |
| 12 | 10k - RC0805FR-0710KL | R_1206_3216Metric | R6, R7, R8, R9, R10, R11, R13, R14 +4 |
Riscduino board design files
The KiCad project lives in the dineshannayya/riscduino_bringup repository on GitHub; these links point at the commit this page was built from.
Riscduino board: common questions
How big is the Riscduino board?
The Riscduino board measures 92.5 × 93.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Riscduino board?
49 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the Riscduino board design files?
From the dineshannayya/riscduino_bringup repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Riscduino board design in my own project?
Yes, under the terms of its Apache-2.0 license, which dineshannayya chose for the repository.
