7 open source boards using the caravel_breakout
Real designs built with the caravel_breakout, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Caravel Nucleo
efabless
68.1 × 92.5 mm89 parts2LNo license40Caravel Nucleo
chipfoundry
68.1 × 92.5 mm89 parts2LNo license1Caravel Nucleo
weyer7
68.1 × 92.5 mm89 parts2LNo license1Caravel Nucleo
Rimal12345
68.1 × 92.5 mm89 parts2LNo license0Caravel pcb v3 FTDI flexy
pohantw
76.2 × 73.8 mm63 parts2LNo license0Riscduino board
dineshannayya
92.5 × 93.8 mm49 parts2LApache-2.02Riscduino Adpater Rev1.0
dineshannayya
92.5 × 93.8 mm49 parts2LNo license2
How designs wire the caravel_breakout
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the caravel_breakout connects to, and the resistors, capacitors and other passives placed on it.
- The CARAVEL_D1 pin has a pull-up to VDDA on 7 of 7 designs, most often 10 kΩ.
- The CARAVEL_CSB pin has a pull-up to VDDA on 7 of 7 designs, most often 10 kΩ.
- The CARAVEL_SCK pin has a pull-up to VDDA on 6 of 7 designs, most often 10 kΩ.
- The CARAVEL_D0 pin has a pull-up to VDDA on 6 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 5, 8 | Connected to: GND 86% | — |
| VCCDpin 6, 50 | Connected to: VCCD 86% | — |
| VDDIOpin 7, 55 | Connected to: VDDA 93% | — |
| VCCD1pin 43 | Connected to: VCCD 100% | — |
| VDDA1pin 44 | Connected to: VDDA1 100% | — |
| VDDApin 45 | Connected to: VDDA 100% | — |
| CARAVEL_SCKpin 46 | Connected to: A connector 86%, W25Q32FVSS 71% |
|
| CARAVEL_D1pin 48 | Connected to: A connector 100%, W25Q32FVSS 86% |
|
| CARAVEL_D0pin 49 | Connected to: A connector 86%, W25Q32FVSS 71% |
|
| CARAVEL_CSBpin 51 | Connected to: A connector 100%, W25Q32FVSS 86% |
|
| XCLKpin 52 | Connected to: A connector 100% |
|
| VDDA2pin 54 | Connected to: VDDA2 100% | — |
| VCCD2pin 56 | Connected to: VCCD2 100% | — |
40 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel Nucleo by efabless, Riscduino Adpater Rev1.0 by dineshannayya, Riscduino board by dineshannayya and Caravel Nucleo by chipfoundry.
The caravel_breakout in open source designs
The gallery holds 7 open source boards using the caravel_breakout from 7 GitHub repositories; a typical one measures about 68.1 × 92.5 mm and carries around 89 components.
100% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Caravel Nucleo by efabless.
Parts used alongside the caravel_breakout
What boards using the caravel_breakout are built for
caravel_breakout: common questions
Where can I find a caravel_breakout reference design?
Each of the 7 boards on this page is a real design using the caravel_breakout. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the caravel_breakout CARAVEL_D1 pin?
The CARAVEL_D1 pin has a pull-up to VDDA on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the caravel_breakout.
What pull-up resistor is used on the caravel_breakout CARAVEL_CSB pin?
The CARAVEL_CSB pin has a pull-up to VDDA on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the caravel_breakout.
What pull-up resistor is used on the caravel_breakout CARAVEL_SCK pin?
The CARAVEL_SCK pin has a pull-up to VDDA on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the caravel_breakout.
What parts are used alongside the caravel_breakout?
The W25Q32FVSS, AZ1117CH-1.8TRG1, FT232H, NCP1117LPST33T3G and NUCLEO144-F746ZG appear in the most repositories here.
How big is a typical board using the caravel_breakout?
The median is 68.1 × 92.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the caravel_breakout?
By GitHub stars, Caravel Nucleo by efabless, with 40 stars.
Can I simulate one of these boards using the caravel_breakout before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.