11 open source boards using the NUCLEO144-F746ZG

Real designs built with the NUCLEO144-F746ZG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the NUCLEO144-F746ZG

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NUCLEO144-F746ZG connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin is left unconnected on 6 of 6 designs.
  • The E5V pin is left unconnected on 6 of 6 designs.
  • The BOOT0 pin is left unconnected on 6 of 6 designs.
  • The IOREF pin is left unconnected on 6 of 6 designs.
VDDpin 5Connected to: Not connected 100%
E5Vpin 6Connected to: Not connected 100%
BOOT0pin 7Connected to: Not connected 100%
GNDpin 8, 19, 20, 22, 49, 60, 71, 72, 81, 92, 111, 126, 135, 143, 144Connected to: GND 100%
NCpin 10, 26, 67Connected to: Not connected 100%
IOREFpin 12Connected to: Not connected 100%
TMS/PA13pin 13Connected to: Not connected 100%
RSTpin 14Connected to: Not connected 100%
TCK/PA14pin 15Connected to: Not connected 100%
+3V3pin 16Connected to: Not connected 83% · 3.3V 17%
+5Vpin 18Connected to: MCP4661 67%, MIC2211-AAYML-TR 67%, a connector 67% · not connected 17% · 5V 17%
  • Series resistor on 67% · 10 kΩ (12), 4.7 kΩ (8)
  • Capacitor to GND on 67% · 1 µF (4)
LD2/PB7pin 21Connected to: Not connected 100%
BT/PC13pin 23Connected to: Not connected 83% · a signal 17%
VINpin 24Connected to: Not connected 100%
RTC_CRYSTAL/PC14pin 25Connected to: Not connected 100%
RTC_CRYSTAL/PC15pin 27Connected to: Not connected 100%
PH0pin 29Connected to: Not connected 100%
ETH_MDIO/PA1pin 30Connected to: Not connected 100%
PH1pin 31Connected to: Not connected 100%
VBATpin 33Connected to: Not connected 100%
PB0pin 34Connected to: Not connected 83% · a signal 17%
ETH_MDC/PC1pin 36Connected to: Not connected 100%
PE2pin 46Connected to: Not connected 83% · a signal 17%
PE3pin 47Connected to: MIC2211-AAYML-TR 67%
  • Series resistor on 67% · 10 kΩ (4)
PE4pin 48Connected to: Not connected 83% · a signal 17%
PE5pin 50Connected to: Not connected 83% · a signal 17%
PF1pin 51Connected to: Not connected 83% · a signal 17%
PF2pin 52Connected to: MIC2211-AAYML-TR 67%
  • Series resistor on 67% · 10 kΩ (4)
PF0pin 53Connected to: Not connected 83% · a signal 17%
PD1pin 55Connected to: Not connected 83% · a signal 17%
PD0pin 57Connected to: Not connected 83% · a signal 17%
PE6pin 62Connected to: Not connected 83% · a signal 17%
PG13/ETH_TXD0pin 68Connected to: Not connected 100%
STLINK_RX/PD9pin 69Connected to: Not connected 100%
PG11/ETH_TX_ENpin 70Connected to: Not connected 100%
ETH_RXD1/PC5pin 78Connected to: Not connected 100%
AVDDpin 79Connected to: Not connected 100%
U5Vpin 80Connected to: Not connected 100%
STLINK_TX/PD8pin 82Connected to: Not connected 100%
PA5pin 83Connected to: Not connected 83% · a signal 17%

88 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel Nucleo by efabless, Riscduino board by dineshannayya, Caravel Nucleo by chipfoundry and Caravel Nucleo by weyer7.

The NUCLEO144-F746ZG in open source designs

The gallery holds 11 open source boards using the NUCLEO144-F746ZG from 7 GitHub repositories; a typical one measures about 72.2 × 92.5 mm and carries around 89 components.

100% are two-layer designs, the rest use four layers or more, and 9% carry an open source license.

The most starred is Caravel-Nucleo v2-M.2 by efabless.

Microcontrollers on boards using the NUCLEO144-F746ZG

What boards using the NUCLEO144-F746ZG are built for

NUCLEO144-F746ZG: common questions

Where can I find a NUCLEO144-F746ZG reference design?

Each of the 11 boards on this page is a real design using the NUCLEO144-F746ZG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the NUCLEO144-F746ZG VDD pin connected?

The VDD pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NUCLEO144-F746ZG.

How is the NUCLEO144-F746ZG E5V pin connected?

The E5V pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NUCLEO144-F746ZG.

How is the NUCLEO144-F746ZG BOOT0 pin connected?

The BOOT0 pin is left unconnected on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NUCLEO144-F746ZG.

What parts are used alongside the NUCLEO144-F746ZG?

The caravel_breakout, W25Q32FVSS, AZ1117CH-1.8TRG1, caravel-M.2-card and FT232H appear in the most repositories here.

Which microcontrollers do boards using the NUCLEO144-F746ZG use?

Most are built on AVR/Arduino (1).

How big is a typical board using the NUCLEO144-F746ZG?

The median is 72.2 × 92.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the NUCLEO144-F746ZG?

By GitHub stars, Caravel-Nucleo v2-M.2 by efabless, with 40 stars.

Can I simulate one of these boards using the NUCLEO144-F746ZG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part