HardLabs

Riscduino Uno

dineshannayya·riscduino_bringup·CI2206Q/riscduino_board/Riscduino_Uno_Rev1.1/Riscduino_Uno.kicad_pcb

Riscduino Uno PCB layout, top view — open source board by dineshannayya

About the Riscduino Uno PCB

Riscduino Uno is an open source PCB design by dineshannayya, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 70.6 × 53.7 mm, with 90 components from 30 distinct parts.

Other key parts include the MAX1232ESA+T, W25Q32JVSS, 23LC1024-I/P, Riscduino and LM1117MP-3.3. By type, the board carries 33 resistors, 27 capacitors, 11 connectors, 8 ICs, 5 diodes and 2 jumpers.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Host all the MPW Bring-up related Enviornment

This directory provides instruction and firmware for test project for Stanford University on the chipIgnite 2206 shuttle.

The current version of this document along with firmware example and tools can be found at

https://github.com/efabless/caravel_board/tree/main/stanford#readme

The development board provides an easy way to test your project. The board has a socket for installing your part on a breakout board with an M.2 edge connector. Remove the screw to insall or replace the breakout board module. The board inserted into a ZIF connector at a 45 deg angle. It is then pressed down and…

Main components on the Riscduino Uno

MAX1232ESA+TW25Q32JVSS23LC1024-I/PRiscduinoLM1117MP-3.3LM1117S-ADJCH340C

Riscduino Uno bill of materials (BOM)

90 components, 30 distinct parts.

QtyPartRefs
1
MAX1232ESA+T
U1
2
W25Q32JVSS
U2, U4
1
23LC1024-I/P
U3
1
Riscduino
U5
1
LM1117MP-3.3
U6
1
LM1117S-ADJ
U7
1
CH340C
U8
1
ASE-10.000MHZ-LC-T
X1
1
Conn_01x06_Pin
J1
2
Conn_01x08_Pin
J2, J9
4
Conn_01x01
J3, J6, J7, J8
1
Conn_02x04_Odd_Even
J4
1
ISP
J5
1
Conn_01x10_Pin
J10
1
USB_B_Micro
J11
2
Jumper_2
JP1, JP2
1
500 Ohm Trim Pot
RV1
1
4Pin Round Button SPST Straight Tactile Switch SMD - TS4550TP
SW1
1
TestPoint
TP1
3
GREEN LED
D1, D4, D5
Show 10 more
QtyPartRefs
1
RED LED
D3
1
BLUE LED
D6
22
0.1uF
C1, C2, C3, C4, C5, C6, C7, C8 +14
3
10uF
C15, C17, C21
2
22uF
C16, C22
15
10K
R1, R2, R3, R4, R5, R6, R7, R22 +7
7
0E
R8, R9, R10, R12, R13, R17, R33
3
DNI
R11, R18, R19
7
470 Ohm
R14, R15, R16, R20, R21, R23, R24
1
0 Ohm
R32

Riscduino Uno design files

The KiCad project lives in the dineshannayya/riscduino_bringup repository on GitHub; these links point at the commit this page was built from.

Riscduino Uno: common questions

How big is the Riscduino Uno PCB?

The Riscduino Uno measures 70.6 × 53.7 mm, has 2 copper layers and is 1.61544 mm thick.

How many components are on the Riscduino Uno?

90 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Riscduino Uno design files?

From the dineshannayya/riscduino_bringup repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Riscduino Uno design in my own project?

Yes, under the terms of its Apache-2.0 license, which dineshannayya chose for the repository.

More boards in riscduino_bringup

Similar boards