35 open source boards using the W25Q32FVSS

Real designs built with the W25Q32FVSS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

35 boardsClear filters|Most starred

How designs wire the W25Q32FVSS

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the W25Q32FVSS connects to, and the resistors, capacitors and other passives placed on it.

  • The WP(D2) pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ.
  • The HOLD(D3) pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ.
  • The VCC pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 nF).
  • The CS pin has a pull-up to 3.3V on 8 of 10 designs, most often 100 kΩ (then 10 kΩ).
CSpin 1Connected to: A connector 70%, SN74LV1T34DCK 50%, caravel_breakout 20%
  • Pull-up to 3.3V on 80% · 100 kΩ (5), 10 kΩ (3)
SO(D1)pin 2Connected to: A connector 80%, SN74LV1T34DCK 50%, caravel_breakout 20%
  • Pull-up to 3.3V on 80% · 100 kΩ (5), 10 kΩ (3)
WP(D2)pin 3Connected to: A connector 70%
  • Pull-up to 3.3V on 90% · 10 kΩ (9)
GNDpin 4Connected to: GND 100%
SI(D0)pin 5Connected to: A connector 80%, SN74LV1T34DCK 60%, caravel_breakout 20%
  • Pull-up to 3.3V on 80% · 100 kΩ (5), 10 kΩ (3)
SCKpin 6Connected to: A connector 80%, SN74LV1T34DCK 50%, caravel_breakout 20%
  • Pull-up to 3.3V on 80% · 100 kΩ (5), 10 kΩ (3)
HOLD(D3)pin 7Connected to: A connector 70%
  • Pull-up to 3.3V on 90% · 10 kΩ (9)
VCCpin 8Connected to: 3.3V 90%
  • Decoupling capacitor on 90% · 100 nF (9), 10 nF (4), 1 µF (4)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 5V Development Board by efabless, GPIO by 89Mods, Riscduino board by dineshannayya and Smart-Air-Filter-Project by ZanzyTHEbar.

The W25Q32FVSS in open source designs

The gallery holds 35 open source boards using the W25Q32FVSS from 10 GitHub repositories; a typical one measures about 76.2 × 73.8 mm and carries around 83 components.

79% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.

The most starred is Caravel-Nucleo v2-M.2 by efabless.

Microcontrollers on boards using the W25Q32FVSS

What boards using the W25Q32FVSS are built for

W25Q32FVSS: common questions

Where can I find a W25Q32FVSS reference design?

Each of the 35 boards on this page is a real design using the W25Q32FVSS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the W25Q32FVSS WP(D2) pin?

The WP(D2) pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the W25Q32FVSS.

What pull-up resistor is used on the W25Q32FVSS HOLD(D3) pin?

The HOLD(D3) pin has a pull-up to 3.3V on 9 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the W25Q32FVSS.

What decoupling capacitors do designs use on the W25Q32FVSS VCC pin?

The VCC pin has a decoupling capacitor on 9 of 10 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 10 open source designs using the W25Q32FVSS.

What parts are used alongside the W25Q32FVSS?

The caravel_breakout, caravel-M.2-card, FT232H, SN74LV1T34DCK and AZ1117CH-1.8TRG1 appear in the most repositories here.

Which microcontrollers do boards using the W25Q32FVSS use?

Most are built on ESP32 (1).

How big is a typical board using the W25Q32FVSS?

The median is 76.2 × 73.8 mm, and 79% are two-layer designs.

What is the most popular open source board using the W25Q32FVSS?

By GitHub stars, Caravel-Nucleo v2-M.2 by efabless, with 40 stars.

Can I simulate one of these boards using the W25Q32FVSS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part