Dev board

dipa-cotton·dev-board·kicad files/flight.kicad_pcb

Dev board layout, top view — open source RP2040/RP2350 board by dipa-cotton

About the Dev board

Dev board is an open source RP2040/RP2350 PCB design by dipa-cotton, published on GitHub. It is a 2-layer board measuring 26.6 × 51.3 mm, with 36 components from 12 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the MCP1700x-330xxTT, W25Q128JVS and LSM6DSOX. By type, the board carries 17 capacitors, 9 resistors, 4 ICs, 4 connectors, 1 crystal and 1 switch.

It belongs with the dev boards & breakouts and sensors designs in this gallery.

Dev board, from the project README
From the project README

Main components on the Dev board

Dev board bill of materials (BOM)

36 components, 12 distinct parts.

QtyPartRefs
1
RP2040
U1
1
MCP1700x-330xxTT
U2
1
W25Q128JVS
U3
1
LSM6DSOX
U4
1
12 mhz
Y2
1
USB_C_Receptacle_USB2.0_14P
J1
2
Conn_01x20_Pin
J2, J3
1
Conn_01x03_Pin
J4
1
SW_Push
SW1
17
C
C1, C2, C3, C4, C5, C6, C7, C8 +9
7
R
R1, R2, R3, R4, R5, R6, R7
2
4.7k
R8, R9

Dev board design files

The KiCad project lives in the dipa-cotton/dev-board repository on GitHub; these links point at the commit this page was built from.

Dev board: common questions

What microcontroller does the Dev board use?

The Dev board is built around the RP2040, from the RP2040/RP2350 family.

How big is the Dev board?

The Dev board measures 26.6 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dev board?

36 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dev board design files?

From the dipa-cotton/dev-board repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dev board design in my own project?

The repository has no license, so all rights stay with dipa-cotton. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dev board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards