Dipado

dipa-cotton·dipado·src/kicad/display.kicad_pcb

Dipado PCB layout, top view — open source ESP32 board by dipa-cotton

About the Dipado PCB

Dipado is an open source ESP32 PCB design by dipa-cotton, published on GitHub. It is a 2-layer board measuring 193.4 × 87.2 mm, with 45 components from 18 distinct parts.

Its main chip is the XIAO_ESP32_S3, from the ESP32 family. Other key parts include the 358, COM-09032 and TAS2505IRGER. By type, the board carries 13 connectors, 11 switches, 6 ICs, 6 capacitors, 5 diodes and 3 resistors.

It belongs with the displays & leds designs in this gallery.

From the project

nintendo but dipa instend of ninten

Dipado, from the project README
From the project README

Main components on the Dipado

Dipado bill of materials (BOM)

45 components, 18 distinct parts.

QtyPartRefs
1
358
U1
2
COM-09032
U2, U6
1
TAS2505IRGER
U3
2
XIAO_ESP32_S3
U4, U5
1
Orpheus Pico
J2
8
mag pogo
J4, J6, J8, J9, J11, J12, J13, J14
3
battery
J5, J10, J15
1
SJ1-3535NG
J7
1
Speaker
LS1
8
SW_Push
SW1, SW2, SW3, SW4, SW6, SW7, SW8, SW9
3
SW_SPDT
SW5, SW10, SW11
2
LED
D1, D2
3
D_Schottky
D3, D4, D5
3
C
C1, C5, C6
2
0.1µF
C2, C3
1
10µF
C4
2
1k
R1, R2
1
220
R3

Dipado design files

The KiCad project lives in the dipa-cotton/dipado repository on GitHub; these links point at the commit this page was built from.

Dipado: common questions

What microcontroller does the Dipado use?

The Dipado is built around the XIAO_ESP32_S3, from the ESP32 family.

How big is the Dipado PCB?

The Dipado measures 193.4 × 87.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dipado?

45 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dipado design files?

From the dipa-cotton/dipado repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dipado design in my own project?

The repository has no license, so all rights stay with dipa-cotton. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dipado without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards