KiCad
dirktjantele·CasualNoises·Fellhorn/Fellhorn rev 2/Device Board/KiCad/KiCad.kicad_pcb
About the KiCad PCB
KiCad is an open source STM32 PCB design by dirktjantele, published on GitHub under the GPL-3.0 license. It is a 6-layer board, with 172 components from 31 distinct parts.
Its main chip is the STM32H723ZGT6, from the STM32 family. Other key parts include the MCP6004, MCP6002, 74HC4051, 74HC595 and 74HC165. By type, the board carries 76 capacitors, 66 resistors, 16 ICs, 8 diodes, 3 inductors and 2 transistors.
From the project
CasualNoises framework and related documents
Main components on the KiCad
KiCad bill of materials (BOM)
172 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H723ZGT6 | LQFP144_STM | U1 |
| 5 | MCP6004 | SOIC-14_3.9x8.7mm_P1.27mm | U2, U3, U5, U6, U7 |
| 1 | MCP6002 | SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 2 | 74HC4051 | SOIC-16_3.9x9.9mm_P1.27mm | U8, U9 |
| 2 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U10, U11 |
| 2 | 74HC165 | SOIC-16_3.9x9.9mm_P1.27mm | U12, U13 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U14 |
| 2 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U15, U17 |
| 2 | MMBT3904 | SOT-23 | Q1, Q2 |
| 1 | 25MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 7 | LED | LED_0805_2012Metric | D1, D2, D3, D4, D5, D7, D8 |
| 1 | 1N4148WS | D_SOD-323 | D6 |
| 3 | FerriteBead | L_0805_2012Metric | FB1, FB2, FB3 |
| 2 | 10pF | C_0402_1005Metric | C1, C2 |
| 2 | 2.2uF | C_0603_1608Metric | C3, C4 |
| 33 | 100nF | C_0402_1005Metric | C5, C7, C8, C9, C10, C11, C12, C13 +25 |
| 8 | 22uF | C_0805_2012Metric | C6, C61, C65, C66, C67, C68, C81, C83 |
| 9 | 47pF | C_0402_1005Metric | C21, C22, C23, C24, C25, C26, C27, C28 +1 |
| 12 | 1nF | C_0402_1005Metric | C33, C34, C35, C36, C37, C38, C39, C40 +4 |
| 10 | 10nF | C_0402_1005Metric | C51, C52, C53, C54, C55, C56, C57, C58 +2 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 3k3 | R_0402_1005Metric | R1, R55, R56 |
| 14 | 10k | R_0402_1005Metric | R2, R30, R38, R39, R40, R42, R44, R46 +6 |
| 4 | 1k5 | R_0402_1005Metric | R3, R4, R5, R6 |
| 7 | 33k | R_0402_1005Metric | R7, R12, R18, R23, R27, R31, R35 |
| 7 | 200k | R_0402_1005Metric | R8, R13, R19, R24, R28, R32, R36 |
| 2 | 120k | R_0402_1005Metric | R9, R14 |
| 11 | 100k | R_0402_1005Metric | R10, R15, R17, R20, R21, R22, R25, R26 +3 |
| 2 | 56k | R_0402_1005Metric | R11, R16 |
| 1 | 6k2 | R_0402_1005Metric | R34 |
| 7 | 470 | R_0603_1608Metric | R41, R43, R45, R47, R49, R51, R53 |
| 8 | 1k | R_0402_1005Metric | R57, R58, R59, R60, R61, R62, R63, R64 |
KiCad design files
The KiCad project lives in the dirktjantele/CasualNoises repository on GitHub; these links point at the commit this page was built from.
KiCad: common questions
What microcontroller does the KiCad use?
The KiCad is built around the STM32H723ZGT6, from the STM32 family.
How big is the KiCad PCB?
The KiCad has 6 copper layers and is 1.6 mm thick.
How many components are on the KiCad?
172 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the KiCad design files?
From the dirktjantele/CasualNoises repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the KiCad design in my own project?
Yes, under the terms of its GPL-3.0 license, which dirktjantele chose for the repository.
Can I test firmware for the KiCad without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in CasualNoises
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k