Embedded system designs
divquan·embedded-system-designs·pregnancy-tester/pregnancy-tester/pregnancy-tester.kicad_pcb
About the Embedded system designs PCB
Embedded system designs is an open source ESP32 PCB design by divquan, published on GitHub under the MIT license. It is a 2-layer board measuring 113 × 116.5 mm, with 47 components from 23 distinct parts.
Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the USBLC6-2P6, CP2104, APDS-9251-001 and LM1117MP-3.3. By type, the board carries 16 resistors, 12 capacitors, 5 ICs, 4 diodes, 2 transistors and 2 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
This repository contains designs for embedded systems, including schematics, PCB layouts, and fabrication files. Ideal for learning and project inspiration.
Welcome to the Embedded Systems Design Repository! This repository contains a comprehensive collection of designs for various embedded systems, including detailed schematics, layouts, and printed circuit board (PCB) designs. Whether you're a beginner looking to learn more about embedded systems or an experienced developer seeking inspiration and reference designs, this repository has something for you.
Main components on the Embedded system designs
Embedded system designs bill of materials (BOM)
47 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2P6 | SOT-666 | U6 |
| 1 | CP2104 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U7 |
| 1 | ESP32-WROOM-32D | ESP32-WROOM-32D | U8 |
| 1 | APDS-9251-001 | Broadcom_LGA-8_2x2mm_P0.5mm | U9 |
| 1 | LM1117MP-3.3 | SOT-223-3_TabPin2 | U10 |
| 1 | UMH3N | SOT-363_SC-70-6 | Q3 |
| 1 | BC817 | SOT-23 | Q4 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix_PTSM-0,5-3-2.5-V-THR_1x03_P2.50mm_Vertical | J4 |
| 1 | WC1602A | WC1602A | DS2 |
| 1 | Polyfuse | Fuse_Bourns_MF-RG500 | F2 |
| 1 | Relay_SPDT | Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm | K2 |
| 1 | R_Potentiometer | Potentiometer_ACP_CA14-VSMD_Vertical_Hole | RV2 |
| 1 | SW_SPST | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW2 |
| 2 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D5, D7 |
| 1 | LL4148 | D_MiniMELF_Handsoldering | D6 |
| 1 | LED_RGBA | LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 | D8 |
| 1 | FerriteBead | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB2 |
| 6 | 22u | C_01005_0402Metric_Pad0.57x0.30mm_HandSolder | C14, C18, C21, C23, C24, C26 |
| 5 | 100n | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C15, C19, C20, C22, C25 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4u7 | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C16 |
| 11 | 10k | R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R17, R18, R19, R20, R21, R22, R28, R29 +3 |
| 5 | 4K7 | R_01005_0402Metric_Pad0.57x0.30mm_HandSolder | R23, R24, R25, R26, R27 |
Embedded system designs design files
The KiCad project lives in the divquan/embedded-system-designs repository on GitHub; these links point at the commit this page was built from.
Embedded system designs: common questions
What microcontroller does the Embedded system designs use?
The Embedded system designs is built around the ESP32-WROOM-32D, from the ESP32 family.
How big is the Embedded system designs PCB?
The Embedded system designs measures 113 × 116.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Embedded system designs?
47 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Embedded system designs design files?
From the divquan/embedded-system-designs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Embedded system designs design in my own project?
Yes, under the terms of its MIT license, which divquan chose for the repository.
Can I test firmware for the Embedded system designs without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k