BibliGotchi
DjukicAleksej·BibliGotchi·PCB-Files/BibliGotchi_PCB.kicad_pcb
About the BibliGotchi PCB
BibliGotchi is an open source ESP32 PCB design by DjukicAleksej, published on GitHub under the MIT license. It is a 2-layer board measuring 51.1 × 64 mm, with 7 components from 5 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the HS96L03W2C03. By type, the board carries 3 switches, 2 ICs and 1 battery holder.
It belongs with the displays & leds designs in this gallery.
From the project
The runtime firmware is engineered inside the Arduino core using C++. It executes cyclic ticks tracking core stat logic while parsing interactive structural button state triggers via hardware pull-up inputs: Left Button (Feed): Replenishes missing core HUN (Hunger) values, keepin
The runtime firmware is engineered inside the Arduino core using C++. It executes cyclic ticks tracking core stat logic while parsing interactive structural button state triggers via hardware pull-up inputs: Left Button (Feed): Replenishes missing core HUN (Hunger) values, keeping your pet fed. Middle Button (Play): Trades -5 ENG (Energy) to buy +10 HAP (Happiness) metrics. Right Button (Sleep): Switches state vectors directly into the deep sleeping routine, generating a custom visual screen profile and recharging +15 ENG (Energy)** metrics.

Main components on the BibliGotchi
BibliGotchi bill of materials (BOM)
7 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-DIP-SMD | U1 |
| 1 | HS96L03W2C03 HS(汉昇) | OLED-TH_L27.8-W27.2-P2.54_C9900033791 | U2 |
| 1 | Battery_Cell | PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | 1207-P6.5MM XHXDZ(兴华鑫) | Buzzer_12x9.5RM7.6 | BUZZER1 |
| 3 | SW_Push | SW-TH_4P-L4.5-W4.5-P3.00-LS4.8 | SW1, SW2, SW3 |
BibliGotchi design files
The KiCad project lives in the DjukicAleksej/BibliGotchi repository on GitHub; these links point at the commit this page was built from.
BibliGotchi: common questions
What microcontroller does the BibliGotchi use?
The BibliGotchi is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the BibliGotchi PCB?
The BibliGotchi measures 51.1 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the BibliGotchi?
7 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BibliGotchi design files?
From the DjukicAleksej/BibliGotchi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the BibliGotchi design in my own project?
Yes, under the terms of its MIT license, which DjukicAleksej chose for the repository.
Can I test firmware for the BibliGotchi without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k