Backpack Defender
donaldbell·productspeedrun·products/backpack-defender/rev-b/5-electronics/backpack-defender.kicad_pcb
About the Backpack Defender PCB
Backpack Defender is an open source ESP32 PCB design by donaldbell, published on GitHub under the Custom license license. It is a 2-layer board measuring 70 × 45 mm, with 41 components from 21 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the TPS61023DRLR and MAX98357AETE+T. By type, the board carries 16 resistors, 13 capacitors, 3 ICs, 3 transistors, 2 switches and 2 diodes.
From the project
Open product designs from the Product Speedrun show: enclosures, KiCad boards, firmware and showcase pages
Product Speedrun is a show about racing a randomly rolled product idea to a showcase-ready concept: an enclosure design, a circuit board and a product page. Everything the show designs is open, and this repository holds it.
See the products: https://donaldbell.github.io/productspeedrun/
Every product here is a design proposal, not something you can buy. Nothing has been manufactured, and each page lists what we still don't know.
Main components on the Backpack Defender
Backpack Defender bill of materials (BOM)
41 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS61023DRLR | SOT-563 | U1 |
| 1 | ESP32-C3-WROOM-02-N4 | ESP32-C3-WROOM-02 | U2 |
| 1 | MAX98357AETE+T | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm_ThermalVias | U3 |
| 2 | AO3401A | SOT-23 | Q1, Q3 |
| 1 | AO3400A | SOT-23 | Q2 |
| 1 | TS-1212-4.3 (12x12x4.3 THT) SILENCE | SW_PUSH-12mm | SW1 |
| 1 | OS102011MA1QN1 POWER | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW2 |
| 1 | WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | LED1 |
| 2 | KT-0603W White | LED_0603_1608Metric | D1, D2 |
| 1 | FXL0624-1R0-M 1uH | L_Changjiang_FXL0624 | L1 |
| 4 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C1, C5, C8, C9 |
| 2 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C2, C3 |
| 4 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C4, C6, C10, C11 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C7 |
| 2 | CL31A476MQHNNNE 47uF | C_1206_3216Metric | C12, C13 |
| 3 | 0603WAF1004T5E 1M | R_0603_1608Metric | R1, R3, R4 |
| 1 | 0603WAF2203T5E 220k | R_0603_1608Metric | R2 |
| 4 | 0603WAF1002T5E 10k | R_0603_1608Metric | R5, R6, R7, R8 |
| 4 | 0603WAF1003T5E 100k | R_0603_1608Metric | R9, R11, R16, R17 |
| 2 | 0603WAF1000T5E 100 | R_0603_1608Metric | R10, R18 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0603WAF470JT5E 47 | R_0603_1608Metric | R14, R15 |
Backpack Defender design files
The KiCad project lives in the donaldbell/productspeedrun repository on GitHub; these links point at the commit this page was built from.
Backpack Defender: common questions
What microcontroller does the Backpack Defender use?
The Backpack Defender is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Backpack Defender PCB?
The Backpack Defender measures 70 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Backpack Defender?
41 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Backpack Defender design files?
From the donaldbell/productspeedrun repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Backpack Defender design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Backpack Defender without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in productspeedrun
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k