Baby Monitor Monitor: Sensor
donaldbell·productspeedrun·episodes/003-003/5-electronics/sensor/bmm-sensor.kicad_pcb
About the Baby Monitor Monitor: Sensor PCB
Baby Monitor Monitor: Sensor is an open source ESP32 PCB design by donaldbell, published on GitHub under the Custom license license. It is a 2-layer board measuring 52 × 24 mm, with 28 components from 20 distinct parts.
Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the MCP73831T-2ACI/OT, AP2112K-3.3TRG1 and ICS-43434. By type, the board carries 9 capacitors, 9 resistors, 4 ICs, 2 switches, 1 transistor and 1 connector.
It belongs with the sensors designs in this gallery.
From the project
Open product designs from the Product Speedrun show: enclosures, KiCad boards, firmware and showcase pages
Product Speedrun is a show about racing a randomly rolled product idea to a showcase-ready concept: an enclosure design, a circuit board and a product page. Everything the show designs is open, and this repository holds it.
See the products: https://donaldbell.github.io/productspeedrun/
Every product here is a design proposal, not something you can buy. Nothing has been manufactured, and each page lists what we still don't know.
Main components on the Baby Monitor Monitor: Sensor
Baby Monitor Monitor: Sensor bill of materials (BOM)
28 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831T-2ACI/OT | SOT-23-5 | U1 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U2 |
| 1 | ESP32-C6-MINI-1-N4 | ESP32-C6-MINI-1 | U3 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB4105-GF-A USB-C | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | 1TS009A-1800-5000-CT I'M AWAKE | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW1 |
| 1 | PCM12SMTR POWER | SW_SPDT_PCM12 | SW2 |
| 1 | KT-0603G green | LED_0603_1608Metric | LED1 |
| 1 | 1N5819WS | D_SOD-323 | D1 |
| 2 | CL10A475KO8NNNC 4.7uF | C_0603_1608Metric | C1, C2 |
| 3 | CL21A106KAYNNNE 10uF | C_0805_2012Metric | C3, C4, C6 |
| 3 | CC0603KRX7R9BB104 100nF | C_0603_1608Metric | C5, C7, C9 |
| 1 | CL10A105KB8NNNC 1uF | C_0603_1608Metric | C8 |
| 2 | 0603WAF5101T5E 5.1k | R_0603_1608Metric | R1, R2 |
| 1 | 0603WAF3901T5E 3.9k | R_0603_1608Metric | R3 |
| 1 | 0603WAF1003T5E 100k | R_0603_1608Metric | R4 |
| 2 | 0603WAF1004T5E 1M | R_0603_1608Metric | R5, R6 |
| 2 | 0603WAF1002T5E 10k | R_0603_1608Metric | R7, R8 |
| 1 | 0603WAF1001T5E 1k | R_0603_1608Metric | R9 |
Baby Monitor Monitor: Sensor design files
The KiCad project lives in the donaldbell/productspeedrun repository on GitHub; these links point at the commit this page was built from.
Baby Monitor Monitor: Sensor: common questions
What microcontroller does the Baby Monitor Monitor: Sensor use?
The Baby Monitor Monitor: Sensor is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.
How big is the Baby Monitor Monitor: Sensor PCB?
The Baby Monitor Monitor: Sensor measures 52 × 24 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Baby Monitor Monitor: Sensor?
28 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Baby Monitor Monitor: Sensor design files?
From the donaldbell/productspeedrun repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Baby Monitor Monitor: Sensor design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Baby Monitor Monitor: Sensor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in productspeedrun
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k