LiBCM-Flash
doppelhub·Honda_Insight_LiBCM·Electronics/PCB (KiCAD)/FLASH/RevA/KiCAD/LiBCM-Flash/LiBCM-Flash.kicad_pcb
About the LiBCM-Flash PCB
LiBCM-Flash is an open source PCB design by doppelhub, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 22 × 18 mm, with 9 components from 8 distinct parts.
Other key parts include the AP63205 and LT1487. By type, the board carries 3 ICs, 3 capacitors, 2 resistors and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
Replacement BCM for G1 Honda Insight Lithium Conversion
LiBCM is a replacement computer that allows the G1 Honda Insight (2000-2006) to safely use modern lithium traction batteries.
LiBCM replaces the OEM Battery Control Module (BCM). LiBCM is presently offered as two different 'Kits': -'5AhG3 LiBCM Kit' uses 12S & 18S lithium battery modules from various modern Honda hybrids, or; -'47Ah LiBCM Kit' uses 12S Samsung SDI lithium battery modules
Main components on the LiBCM-Flash
LiBCM-Flash bill of materials (BOM)
9 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP63205 XTSD04G_FLASH | NXP_LGA-8_3x5mm_P1.25mm_H1.2mm | U1 |
| 1 | LT1487 74LVC125 | SO-14_3.9x8.65mm_P1.27mm | U2 |
| 1 | LT1487 MIC5504-3.3YM5 | SOT-23-5 | U3 |
| 1 | Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | 100n | C_0805_2012Metric | C1 |
| 2 | 100N 1u | C_0805_2012Metric | C3, C4 |
| 1 | 1K24 7k32 | R_0805_2012Metric | R1 |
| 1 | 1K24 100 | R_0805_2012Metric | R2 |
LiBCM-Flash design files
The KiCad project lives in the doppelhub/Honda_Insight_LiBCM repository on GitHub; these links point at the commit this page was built from.
LiBCM-Flash: common questions
How big is the LiBCM-Flash PCB?
The LiBCM-Flash measures 22 × 18 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LiBCM-Flash?
9 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LiBCM-Flash design files?
From the doppelhub/Honda_Insight_LiBCM repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LiBCM-Flash design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which doppelhub chose for the repository.
More boards in Honda_Insight_LiBCM
LiBCM
doppelhub
355 × 160 mm706 parts4LCC-BY-SA-4.0255AhG3-18S
doppelhub
296.5 × 124 mm171 parts2LCC-BY-SA-4.0255AhG3-12S
doppelhub
240.5 × 124 mm129 parts2LCC-BY-SA-4.025LiBCM-Daughterboard
doppelhub
166.8 × 31 mm73 parts4LCC-BY-SA-4.02547AhFoMoCo
doppelhub
324.5 × 67 mm29 parts2LCC-BY-SA-4.025UHP1500FanControl
doppelhub
190 × 11 mm17 parts2LCC-BY-SA-4.025
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k