LineSensor Board
dquang05·system_desgin_project·hardware/LineSensor_Board/LineSensor_Board.kicad_pcb
About the LineSensor Board
LineSensor Board is an open source PCB design by dquang05, published on GitHub. It is a 2-layer board measuring 90 × 40 mm, with 16 components from 4 distinct parts.
Other key parts include the TCRT5000. By type, the board carries 10 resistors, 5 ICs and 1 connector.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Academic project - AGV: line following robot
An advanced Autonomous Mobile Robot firmware built on the ESP-IDF v5.x framework. Designed with strict real-time constraints, thread-safety, and modular architecture, this project demonstrates professional-grade embedded systems engineering using FreeRTOS and Object-Oriented C++.
The firmware is designed with a strict Application-Library Separation.
- lib/: Contains hardware-agnostic, non-blocking drivers (Motor Control, PID, ADC DMA, Loadcell, Wi-Fi). No FreeRTOS tasks are spawned here. - src/: The Application layer orchestrating high-level state machines, task creation, and global…
Main components on the LineSensor Board
LineSensor Board bill of materials (BOM)
16 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | TCRT5000 | OPTO_TCRT5000 | U1, U2, U3, U4, U5 |
| 1 | Screw_Terminal_01x07 | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 5 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7, R9 |
| 5 | 2400 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8, R10 |
LineSensor Board design files
The KiCad project lives in the dquang05/system_desgin_project repository on GitHub; these links point at the commit this page was built from.
LineSensor Board: common questions
How big is the LineSensor Board?
The LineSensor Board measures 90 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LineSensor Board?
16 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the LineSensor Board design files?
From the dquang05/system_desgin_project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LineSensor Board design in my own project?
The repository has no license, so all rights stay with dquang05. Use it as a reference, and ask the author before reusing the design.
More boards in system_desgin_project
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k