Main board
dquang05·system_desgin_project·hardware/main_board/main_board.kicad_pcb
About the Main board
Main board is an open source ESP32 PCB design by dquang05, published on GitHub. It is a 2-layer board measuring 100 × 90 mm, with 74 components from 38 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PC837, TB6612FNG, LM2596T-12, LM2596T-5 and LM2596T-3.3. By type, the board carries 27 resistors, 19 capacitors, 10 ICs, 5 diodes, 3 inductors and 2 transistors.
It belongs with the robotics & motion, iot & wireless and sensors designs in this gallery.
From the project
Academic project - AGV: line following robot
An advanced Autonomous Mobile Robot firmware built on the ESP-IDF v5.x framework. Designed with strict real-time constraints, thread-safety, and modular architecture, this project demonstrates professional-grade embedded systems engineering using FreeRTOS and Object-Oriented C++.
The firmware is designed with a strict Application-Library Separation.
- lib/: Contains hardware-agnostic, non-blocking drivers (Motor Control, PID, ADC DMA, Loadcell, Wi-Fi). No FreeRTOS tasks are spawned here. - src/: The Application layer orchestrating high-level state machines, task creation, and global…
Main components on the Main board
Main board bill of materials (BOM)
74 components, 38 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U0 |
| 2 | PC837 | DIP-12_W7.62mm | U1, U2 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U3 |
| 1 | LM2596T-12 | TO-220-5_Vertical | U4 |
| 1 | LM2596T-5 | TO-220-5_Vertical | U5 |
| 1 | LM2596T-3.3 | TO-220-5_Vertical | U6 |
| 1 | HX711 | SOIC-16_3.9x9.9mm_P1.27mm | U7 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U8 |
| 1 | CP2104 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U9 |
| 1 | SS8550 | SOT-23 | Q1 |
| 1 | UMH3N | SOT-363_SC-70-6 | Q2 |
| 1 | MCU POWER | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | MOTOR POWER | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | LineSensor_Header | JST_EH_S7B-EH_1x07_P2.50mm_Horizontal | ADC1 |
| 1 | Loadcell_Header | JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | LOADCELL1 |
| 1 | Encoder1_Header | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | Left_Encoder1 |
| 1 | Encoder2_Header | JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | Right_Encoder1 |
| 1 | SW_Nidec_CAS-120A1 | SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB-C1 |
| 3 | 1N5822 | D_0805_2012Metric | D1, D2, D3 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LED | LED_0805_2012Metric | D4, D5 |
| 3 | 22uH | L_6.3x6.3_H3 | L1, L2, L3 |
| 4 | 680uF | CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C5 |
| 1 | 560uF | CP_Radial_D8.0mm_P5.00mm | C4 |
| 1 | 470uF | CP_Radial_D8.0mm_P5.00mm | C6 |
| 3 | 10uF | C_0805_2012Metric | C7, C15, C17 |
| 8 | 0.1uF | C_0805_2012Metric | C8, C9, C10, C11, C12, C14, C16, C18 |
| 1 | 10uF | C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C13 |
| 1 | 4.7uF | C_0805_2012Metric | C19 |
| 6 | 1K | R_0603_1608Metric | R1, R2, R3, R4, R5, R6 |
| 3 | 12K | R_0603_1608Metric | R7, R17, R18 |
| 4 | 10K | R_0603_1608Metric | R8, R23, R26, R27 |
| 2 | 100 | R_0603_1608Metric | R9, R10 |
| 6 | 220 | R_0603_1608Metric | R11, R12, R13, R14, R15, R16 |
| 2 | 5.1K | R_0603_1608Metric | R19, R20 |
| 1 | 22.1K | R_0603_1608Metric | R21 |
| 1 | 47.5K | R_0603_1608Metric | R22 |
| 2 | 470 | R_0603_1608Metric | R24, R25 |
Main board design files
The KiCad project lives in the dquang05/system_desgin_project repository on GitHub; these links point at the commit this page was built from.
Main board: common questions
What microcontroller does the Main board use?
The Main board is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Main board?
The Main board measures 100 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Main board?
74 components, from 38 distinct parts. The full bill of materials is listed on this page.
Where can I download the Main board design files?
From the dquang05/system_desgin_project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Main board design in my own project?
The repository has no license, so all rights stay with dquang05. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Main board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in system_desgin_project
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k