Dreamster board
About the Dreamster board
Dreamster board is an open source PCB design by dreamster, published on GitHub. It is a 2-layer board measuring 62 × 60 mm, with 50 components from 31 distinct parts.
Other key parts include the DRV8833, TL082, LM386 and TCRT1000. By type, the board carries 13 resistors, 12 capacitors, 11 connectors, 5 ICs, 2 transistors and 2 inductors.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
Specialized Arduino board which is the heart of the Dreamster Robot.
Main components on the Dreamster board
Dreamster board bill of materials (BOM)
50 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8833 | drv8833 | IC1 |
| 1 | TL082 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U1 |
| 1 | LM386 | SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 2 | TCRT1000 | Socket_Strip_Straight_1x04 | U3, U4 |
| 1 | BC857 | sot23 | Q1 |
| 1 | BC847 | sot23 | Q2 |
| 1 | DM1AA-SF-PEJ(21) SD_Card | SD_Card_Receptacle | CON1 |
| 5 | CONN_01X04 | Socket_Strip_Straight_1x04 | P1, P2, P3, P4, P5 |
| 2 | CONN_01X02 | Socket_Strip_Straight_1x02 | P6, P7 |
| 1 | CONN_01X06 | Socket_Strip_Straight_1x06 | P8 |
| 2 | CONN_01X01 | 1pin | P11, P12 |
| 1 | 10K 10k | POT_SMD | RV1 |
| 2 | 10k | POT_SMD | RV2, RV3 |
| 1 | SW_PUSH | SW_PUSH_SMALL | SW1 |
| 1 | CLV6A-FKB-CK1P1G1BB7R3R3 LED_RGB_A | rgb_led_plcc6 | D1 |
| 2 | 1 uH | C_0805 | L1, L2 |
| 2 | 18N 18n | C_0805 | C1, C3 |
| 2 | 100 nF | C_0805 | C2, C6 |
| 2 | 100n | C_0805 | C4, C9 |
| 1 | 3.3 uF | C_0805 | C5 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 47N 47n | C_0805 | C7 |
| 1 | 10 uF | C_0805 | C8 |
| 1 | 2.2U 2.2u | C_0805 | C10 |
| 1 | 10N 10n | C_0805 | C11 |
| 1 | 220U 220u | c_elec_6.3x7.7 | C12 |
| 4 | 10K 10k | R_0805 | R1, R2, R3, R12 |
| 2 | 2.2K 2.2k | R_0805 | R4, R5 |
| 1 | 10 | R_0805 | R6 |
| 3 | 100 | R_0805 | R7, R8, R10 |
| 2 | 10K 100 | R_0805 | R9, R11 |
| 1 | 10K 47k | R_0805 | R13 |
Dreamster board design files
The KiCad project lives in the dreamster/dreamster-board repository on GitHub; these links point at the commit this page was built from.
Dreamster board: common questions
How big is the Dreamster board?
The Dreamster board measures 62 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Dreamster board?
50 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Dreamster board design files?
From the dreamster/dreamster-board repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Dreamster board design in my own project?
The repository has no license, so all rights stay with dreamster. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Breakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k
Breakout 112pin Connector
174 × 58 mm39 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k