HardLabs

S11639-01 Sensor Board with SPI interface

drmcnelson·S11639-01-Linear-CCD-PCB-and-Code·KiCAD_files/S11639-01_SPIboard.kicad_pcb

S11639-01 Sensor Board with SPI interface layout, top view — open source board by drmcnelson

About the S11639-01 Sensor Board with SPI interface

S11639-01 Sensor Board with SPI interface is an open source PCB design by drmcnelson, published on GitHub under the CC-BY-NC-4.0 license. It is a 4-layer board measuring 70 × 40 mm, with 61 components from 29 distinct parts.

Other key parts include the 74LVC1T45GW,125, MCP33131D-10-I/MS, ADA4807-2ARMZ-R7, LT1761-BYP and TPS72218. By type, the board carries 30 capacitors, 15 resistors, 8 ICs, 4 connectors, 1 jumper and 1 switch.

It belongs with the sensors designs in this gallery.

From the project

PCB and Code (Teensy 4) for the Hamamatsu S11639-01 Linear CCD with 16 bit ADC and SPI interface

Original repository github.com/drmcnelson/S11639-01-Linear-CCD-PCB-and-Code

This repo provides electronics, firmware and host software for the Hamamatsu S11639-01, a linear CCD sensor that has high sensitivity at 1300V/lx s and low dark noise at 0.2mV (for a 10msec exposure). With saturation at 2V, the dynamic range is 10,000. The electrical design is implemented as a two board set, sensor and controller, for mechanical stability and interchangeability. The sensor board has the socketed sensor, logic gates to drive the pins, and a low noise all differential analog section with a high…

S11639-01 Sensor Board with SPI interface, from the project README
From the project README

Main components on the S11639-01 Sensor Board with SPI interface

74LVC1T45GW,125MCP33131D-10-I/MSADA4807-2ARMZ-R7LT1761-BYPTPS72218

S11639-01 Sensor Board with SPI interface bill of materials (BOM)

61 components, 29 distinct parts.

QtyPartRefs
4
74LVC1T45GW,125
IC1, IC2, IC3, IC5
1
MCP33131D-10-I/MS
MCP33131D-10-I_MS
IC4
1
ADA4807-2ARMZ-R7
U1
1
LT1761-BYP
U2
1
TPS72218
U3
2
Conn_01x03_Male
J1, J4
1
Conn_02x10_Odd_Even
J2
1
0705430001
705430001
J3
1
Jumper_2_Open
JP1
1
10K
RV1
1
S11639-01
S1
1
10uH
L1
4
22uF
C1, C5, C29, C30
14
0.1uF
C2, C3, C4, C6, C8, C10, C11, C13 +6
4
1uF
C7, C18, C25, C27
2
2nF
C9, C14
3
10uF
C12, C20, C28
1
2p
C16
1
100pf
C22
1
0.01uF
C26
Show 9 more
QtyPartRefs
2
100
R1, R13
2
24.9
R2, R5
2
2k
R3, R4
3
49.9
R6, R7, R9
1
10K
R8
1
30K
R10
1
10K
R11
1
4.4K
R12
2
82
R14, R15

S11639-01 Sensor Board with SPI interface design files

The KiCad project lives in the drmcnelson/S11639-01-Linear-CCD-PCB-and-Code repository on GitHub; these links point at the commit this page was built from.

S11639-01 Sensor Board with SPI interface: common questions

How big is the S11639-01 Sensor Board with SPI interface?

The S11639-01 Sensor Board with SPI interface measures 70 × 40 mm, has 4 copper layers and is 4.69 mm thick.

How many components are on the S11639-01 Sensor Board with SPI interface?

61 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the S11639-01 Sensor Board with SPI interface design files?

From the drmcnelson/S11639-01-Linear-CCD-PCB-and-Code repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the S11639-01 Sensor Board with SPI interface design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in S11639-01-Linear-CCD-PCB-and-Code

Similar boards