8 open source boards using the MCP33131D-10-I/MS
Real designs built with the MCP33131D-10-I/MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zs1100a
zscircuits
129 × 104.6 mm486 partsNo license76S11639-01 Sensor Board with SPI interface
drmcnelson
70 × 40 mm61 parts4LCC-BY-NC-4.015Laboratory-Instrumentation-Amplifier with-16bit-1MSPS-ADC
drmcnelson
60 × 40 mm74 parts4LCC-BY-NC-4.06ESP32
Glove v4-routing candidate
latintzar
100 × 80 mm561 parts8LMIT0ESP32
Glove v4-placement
latintzar
100 × 80 mm560 parts6LMIT0Nordic nRF
Glove v3-routed
latintzar
90 × 60 mm356 parts4LMIT0Nordic nRF
Glove v3-floorplan
latintzar
70 × 46 mm333 parts4LMIT0Nordic nRF
Glove v3-grouped
latintzar
90 × 60 mm330 parts4LMIT0
The MCP33131D-10-I/MS in open source designs
The gallery holds 8 open source boards using the MCP33131D-10-I/MS from 4 GitHub repositories; a typical one measures about 90 × 60 mm and carries around 345 components.
100% use four copper layers or more, and 63% carry an open source license.
The most starred is Zs1100a by zscircuits.
Microcontrollers on boards using the MCP33131D-10-I/MS
What boards using the MCP33131D-10-I/MS are built for
MCP33131D-10-I/MS: common questions
Where can I find a MCP33131D-10-I/MS reference design?
Each of the 8 boards on this page is a real design using the MCP33131D-10-I/MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP33131D-10-I/MS use?
Most are built on Nordic nRF (3) and ESP32 (2).
How big is a typical board using the MCP33131D-10-I/MS?
The median is 90 × 60 mm, and 0% are two-layer designs.
What is the most popular open source board using the MCP33131D-10-I/MS?
By GitHub stars, Zs1100a by zscircuits, with 76 stars.
Can I simulate one of these boards using the MCP33131D-10-I/MS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.