DB-high voltage v2

echopen·PRJ-medtec_kit·electronic/daughter_boards/DB-high_voltage/DB-high_voltage_v2/src/DB-high_voltage_v2.kicad_pcb

DB-high voltage v2 PCB layout, top view — open source board by echopen

About the DB-high voltage v2 PCB

DB-high voltage v2 is an open source PCB design by echopen, published on GitHub. It is a 2-layer board measuring 35.6 × 52.1 mm, with 6 components from 6 distinct parts.

Other key parts include the LM555N. By type, the board carries 3 connectors, 1 IC and 1 capacitor.

From the project

Connector P2 or P3 (angled socket and SMA connector respectively) are used to connect DB-pulser.

Connector P2 or P3 (angled socket and SMA connector respectively) are used to connect DB-pulser.

Cons: one have to put the output of the recom at the minimum or it drains all the curent

DB-high voltage v2, from the project README — From the project README

Main components on the DB-high voltage v2

DB-high voltage v2 bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

Qty	Part	Footprint	Refs
1	LM555N R05-100B TI	RECOM	U1
1	CONN_01X19 Molex	Header_pin_angled_1x19	P1
1	CONN_01X02 Molex	Socket_Strip_Angled_1x02	P2
1	SMA Johnson / Cinch Connectivity Solutions	SMA	P3
1	POT	Potentiometer_Bourns_3296Y_3-8Zoll_Angular_ScrewUp	RV1
1	10N 4.7u (150V) Vishay	CP_TH_common	C1

DB-high voltage v2 design files

The KiCad project lives in the echopen/PRJ-medtec_kit repository on GitHub; these links point at the commit this page was built from.

DB-high voltage v2: common questions

How big is the DB-high voltage v2 PCB?

The DB-high voltage v2 measures 35.6 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DB-high voltage v2?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DB-high voltage v2 design files?

From the echopen/PRJ-medtec_kit repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DB-high voltage v2 design in my own project?

The repository has no license, so all rights stay with echopen. Use it as a reference, and ask the author before reusing the design.

More boards in PRJ-medtec_kit

Earlier revisions in the repo: DB-high_voltage_v1