HardLabs

DB-motor control v3 old

echopen·PRJ-medtec_kit·electronic/daughter_boards/DB-motor_control/DB-motor_control_v3/src/DB-motor_control_v3_old.kicad_pcb

DB-motor control v3 old PCB layout, top view — open source board by echopen

About the DB-motor control v3 old PCB

DB-motor control v3 old is an open source PCB design by echopen, published on GitHub. It is a 2-layer board measuring 64.8 × 52.1 mm, with 17 components from 14 distinct parts.

By type, the board carries 7 connectors, 4 capacitors, 4 resistors and 2 transistors.

It belongs with the robotics & motion designs in this gallery.

From the project

This daughter board is for driving stepper motor MDL-motor_v2 and generate the command pulse for the pulser. An arduino is pluged on socket P6 and P7, a stepper driver pololu A4988 is plugged on socket P3 and P4 and stepper motor is plugged on socket P5. Instruction about the ori

This daughter board is for driving stepper motor MDL-motor_v2 and generate the command pulse for the pulser. An arduino is pluged on socket P6 and P7, a stepper driver pololu A4988 is plugged on socket P3 and P4 and stepper motor is plugged on socket P5. Instruction about the orientation of them is writen on the PCB.

Socket P2 is used to connect the RedPitaya with this daughterboard, follow MDL-motorcontrol find corresponding GPIO of the RedPitaya.

DB-motor control v3 old, from the project README
From the project README

DB-motor control v3 old bill of materials (BOM)

17 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
2N2222
Central Semiconductor
Q1, Q2
1
CONN_01X19
Molex
P1
1
CONN_01X02
CONN_01X09
Molex
P2
2
CONN_01X08
P3, P4
1
CONN_01X04
P5
2
CONN_01X15
P6, P7
1
10N
10u
Vishay
C1
1
47N
100n
Vishay
C2
1
47U
100u
Nichicon
C3
1
4.7U
100n
Nichicon
C4
1
2.2K
680
KOA speer
R1
1
12K
1.5k
KOA speer
R2
1
3.3K
1.5k
KOA speer
R3
1
1.8K
680
KOA speer
R4

DB-motor control v3 old design files

The KiCad project lives in the echopen/PRJ-medtec_kit repository on GitHub; these links point at the commit this page was built from.

DB-motor control v3 old: common questions

How big is the DB-motor control v3 old PCB?

The DB-motor control v3 old measures 64.8 × 52.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the DB-motor control v3 old?

17 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the DB-motor control v3 old design files?

From the echopen/PRJ-medtec_kit repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the DB-motor control v3 old design in my own project?

The repository has no license, so all rights stay with echopen. Use it as a reference, and ask the author before reusing the design.

More boards in PRJ-medtec_kit

Similar boards