Alphanso robot

EHMD28·alphanso-robot·schematic/alphanso-rover.kicad_sch

Alphanso robot

About the Alphanso robot PCB

Alphanso robot is an open source ESP32 PCB design by EHMD28, published on GitHub. It is a board, with 10 components from 6 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the TB6612FNG and LM2596S-5. By type, the board carries 4 ICs, 4 modules, 1 diode and 1 resistor.

It belongs with the robotics & motion, iot & wireless and power & battery designs in this gallery.

From the project

Alphanso is a mecanum-wheeled rover which is controlled using a PS4 controller.

Alphanso is first robot I designed and created on my own (hence the name). Alphanso has a 4-wheel mecanum drivetrain and is controlled via bluetooth using a PS4 controller. I later plan to create another rover with more features, but I consider this project very successful for a first attempt.

The chassis for Alphanso was 3D printed. Since it's wide and flat, it would have made more sense to cut it out of another material, but I didn't have any of the necessary tools on hand. The CAD model for the chassis is available on Onshape here, and the full assembly is available here.

Main components on the Alphanso robot

Alphanso robot bill of materials (BOM)

10 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
2
TB6612FNG
U2, U3
1
LM2596S-5
LM2596_Module
U4
4
TT Motor (Adafruit #3777)
M1, M2, M3, M4
1
Red
D1
1
470Ω
R1

Alphanso robot design files

The KiCad project lives in the EHMD28/alphanso-robot repository on GitHub; these links point at the commit this page was built from.

Alphanso robot: common questions

What microcontroller does the Alphanso robot use?

The Alphanso robot is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How many components are on the Alphanso robot?

10 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Alphanso robot design files?

From the EHMD28/alphanso-robot repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the Alphanso robot design in my own project?

The repository has no license, so all rights stay with EHMD28. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Alphanso robot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards