HardLabs

Panel

embeddedalpha·PCB-Design·LOGSX/panel.kicad_pcb

Panel PCB layout, top view — open source STM32 board by embeddedalpha
Simulate this board

About the Panel PCB

Panel is an open source STM32 PCB design by embeddedalpha, published on GitHub under the MIT license. It is a board measuring 99.7 × 108 mm, with 94 components from 43 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the W25Q32JVSS, LT1129-3.3_SO8, MCP73113_4, TESEO-LIV3F and BGA725L6E6327FTSA1. By type, the board carries 46 capacitors, 11 inductors, 11 resistors, 10 ICs, 4 connectors and 3 crystals.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Repository for PCB Design Projects

Panel, from the project README
From the project README

Main components on the Panel

W25Q32JVSSLT1129-3.3_SO8MCP73113_4TESEO-LIV3FBGA725L6E6327FTSA1SX1273PE4259B4327STM32F103C8TxDS2782

Panel bill of materials (BOM)

94 components, 43 distinct parts.

QtyPartRefs
1
W25Q32JVSS
U1
1
LT1129-3.3_SO8
U2
1
MCP73113_4
U3
1
TESEO-LIV3F
U4
1
BGA725L6E6327FTSA1
U5
1
SX1273
U6
1
PE4259
U7
1
B4327
U8
1
STM32F103C8Tx
U9
1
DS2782
U10
3
Crystal_GND23
Y1, Y2, Y3
1
BATTERY CONN
J2
1
POWER IN
J3
2
SMA_Edge
J4, J5
1
SW_SPDT
SW1
3
TestPoint
TP1, TP2, TP3
1
VAL**
mouse-bite-3mm-slot
1
VAL**
mouse-bite-3mm-slot-3way
1
D_Small
D1
1
LED
D2
Show 23 more
QtyPartRefs
1
1N5822
D3
2
100MHz
FB1, FB2
1
330uH
L1
6
X
L2, L4, L5, L7, L8, L9
1
5nF
L3
1
27nH
L6
7
2.2pF
C1, C2, C3, C4, C5, C46, C47
2
1uF
C6, C15
2
1pF
C7, C8
4
2.2pF
C9, C10, C11, C12
5
1nF
C13, C16, C22, C27, C29
2
22pF
C14, C19
1
330uF
C17
12
X
C20, C23, C25, C33, C35, C36, C38, C40 +4
3
120pF
C21, C32, C41
4
100nF
C24, C26, C30, C34
4
56pF
C28, C31, C37, C39
1
1K7
R1
2
4.7K
R2, R3
1
R_Small
R4
5
1K
R5, R6, R7, R8, R9
1
10K
R10
1
0
R11

Panel design files

The KiCad project lives in the embeddedalpha/PCB-Design repository on GitHub; these links point at the commit this page was built from.

Panel: common questions

What microcontroller does the Panel use?

The Panel is built around the STM32F103C8Tx, from the STM32 family.

How big is the Panel PCB?

The Panel measures 99.7 × 108 mm and is 1.6 mm thick.

How many components are on the Panel?

94 components, from 43 distinct parts. The full bill of materials is listed on this page.

Where can I download the Panel design files?

From the embeddedalpha/PCB-Design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Panel design in my own project?

Yes, under the terms of its MIT license, which embeddedalpha chose for the repository.

Can I test firmware for the Panel without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PCB-Design

Similar boards