6 open source boards using the BGA725L6E6327FTSA1

Real designs built with the BGA725L6E6327FTSA1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The BGA725L6E6327FTSA1 in open source designs

The gallery holds 6 open source boards using the BGA725L6E6327FTSA1 from 4 GitHub repositories; a typical one measures about 94.3 × 70 mm and carries around 92 components.

100% use four copper layers or more, and 83% carry an open source license.

The most starred is Panel by embeddedalpha.

Parts used alongside the BGA725L6E6327FTSA1

Microcontrollers on boards using the BGA725L6E6327FTSA1

What boards using the BGA725L6E6327FTSA1 are built for

BGA725L6E6327FTSA1: common questions

Where can I find a BGA725L6E6327FTSA1 reference design?

Each of the 6 boards on this page is a real design using the BGA725L6E6327FTSA1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the BGA725L6E6327FTSA1 use?

Most are built on STM32 (4) and ESP32 (1).

How big is a typical board using the BGA725L6E6327FTSA1?

The median is 94.3 × 70 mm, and 0% are two-layer designs.

What is the most popular open source board using the BGA725L6E6327FTSA1?

By GitHub stars, Panel by embeddedalpha, with 75 stars.

Can I simulate one of these boards using the BGA725L6E6327FTSA1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part