HardLabs

ELI2040c

Emute-Lab-Instruments·ELI2040·ELI2040c/ELI2040c.kicad_pcb

ELI2040c PCB layout, top view — open source RP2040/RP2350 board by Emute-Lab-Instruments

About the ELI2040c PCB

ELI2040c is an open source RP2040/RP2350 PCB design by Emute-Lab-Instruments, published on GitHub. It is a 4-layer board measuring 19.9 × 90.4 mm, with 59 components from 31 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the TLV76733DRVR, TPS62163DSG and W25Q128JVS. By type, the board carries 28 capacitors, 8 resistors, 6 connectors, 5 ICs, 4 diodes and 3 inductors.

Main components on the ELI2040c

TLV76733DRVRTPS62163DSGRP2040W25Q128JVS

ELI2040c bill of materials (BOM)

59 components, 31 distinct parts.

QtyPartRefs
2
TLV76733DRVR
U1, U4
1
TPS62163DSG
U3
1
RP2040
U7
1
W25Q128JVS
U11
1
YXC X322512MSB4SI
Y1
1
Power Header
J2
1
ADCs Header
J3
1
Conn_01x26
J4
1
GND2
J5
2
Conn_02x01
J7, J8
1
PIN_HEADER_2x5 POWER
H1
2
TS-1187A-B-A-B
XKB Connectivity(中国星坤)
SW1, SW2
1
TYPE-C_16PIN_2MD(073)
USB2
3
1N5819
D1, D2, D3
1
LED Test
D15
2
FerriteBead GZ2012D101TF
FB1, FB2
1
2.2uH, 4.8mOhm
L1
2
1u
C1, C5
2
22u 0805
C2, C8
3
100n
C3, C13, C19
Show 11 more
QtyPartRefs
13
100n
C4, C6, C10, C11, C14, C16, C17, C18 +5
3
22u
C7, C9, C25
2
1u
C12, C15
1
10u
C23
2
30p
C27, C28
2
5.1k
R3, R4
1
100k 1% 0402
R6
2
27
R21, R22
1
1k
R29
1
1k
R36
1
1.5k
R65

ELI2040c design files

The KiCad project lives in the Emute-Lab-Instruments/ELI2040 repository on GitHub; these links point at the commit this page was built from.

ELI2040c: common questions

What microcontroller does the ELI2040c use?

The ELI2040c is built around the RP2040, from the RP2040/RP2350 family.

How big is the ELI2040c PCB?

The ELI2040c measures 19.9 × 90.4 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ELI2040c?

59 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the ELI2040c design files?

From the Emute-Lab-Instruments/ELI2040 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ELI2040c design in my own project?

The repository has no license, so all rights stay with Emute-Lab-Instruments. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ELI2040c without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ELI2040

Similar boards