9 open source boards using the TPS62163DSG

Real designs built with the TPS62163DSG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TPS62163DSG

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TPS62163DSG connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 7 of 7 designs, most often 2.2 µH.
  • The VOS pin has a inductor on 6 of 7 designs, most often 2.2 µH.
  • The PG pin has a pull-up to 5V on 5 of 7 designs, most often 100 kΩ.
  • The EN pin is tied to 12V on 5 of 7 designs (a signal on 2).
PGNDpin 1Connected to: GND 71% · a signal 29%
VINpin 2Connected to: 12V 71% · a signal 29%
  • Decoupling capacitor on 57% · 10 µF (4), 220 µF (1), 100 nF (1)
ENpin 3Connected to: 12V 71% · a signal 29%
AGNDpin 4Connected to: GND 71% · a signal 29%
FBpin 5Connected to: GND 71% · a signal 29%
VOSpin 6Connected to: 5V 86%
  • Inductor on 86% · 2.2 µH (5)
  • Decoupling capacitor on 43% · 22 µF (3), 10 µF (1), 100 nF (1)
SWpin 7Connected to: Signal 100%
  • Inductor on 100% · 2.2 µH (6)
PGpin 8Connected to: Signal 86%
  • Pull-up to 5V on 71% · 100 kΩ (5)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pump controller by nfranzwa, PowerBoard by codujla, ELI2040c by Emute-Lab-Instruments and Controlexp by Simonhajd.

The TPS62163DSG in open source designs

The gallery holds 9 open source boards using the TPS62163DSG from 7 GitHub repositories; a typical one measures about 56 × 77.4 mm and carries around 53 components.

78% use four copper layers or more, and 11% carry an open source license.

The most starred is Pump controller by nfranzwa.

Parts used alongside the TPS62163DSG

Microcontrollers on boards using the TPS62163DSG

TPS62163DSG: common questions

Where can I find a TPS62163DSG reference design?

Each of the 9 boards on this page is a real design using the TPS62163DSG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS62163DSG SW pin connected?

The SW pin has a inductor on 7 of 7 designs, most often 2.2 µH. Counted from the KiCad layouts of 7 open source designs using the TPS62163DSG.

How is the TPS62163DSG VOS pin connected?

The VOS pin has a inductor on 6 of 7 designs, most often 2.2 µH. Counted from the KiCad layouts of 7 open source designs using the TPS62163DSG.

What pull-up resistor is used on the TPS62163DSG PG pin?

The PG pin has a pull-up to 5V on 5 of 7 designs, most often 100 kΩ. Counted from the KiCad layouts of 7 open source designs using the TPS62163DSG.

What parts are used alongside the TPS62163DSG?

The TPS62162DSG, SN74LVC1T45DBV and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the TPS62163DSG use?

Most are built on ESP32 (4), STM32 (2), NXP (1) and RP2040/RP2350 (1).

How big is a typical board using the TPS62163DSG?

The median is 56 × 77.4 mm, and 22% are two-layer designs.

What is the most popular open source board using the TPS62163DSG?

By GitHub stars, Pump controller by nfranzwa, with 2 stars.

Can I simulate one of these boards using the TPS62163DSG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part