Apple ii rom adapter
erikarn·radio-pcbs·apple-ii-rom-adapter/apple-ii-rom-adapter/apple-ii-rom-adapter.kicad_pcb
About the Apple ii rom adapter PCB
Apple ii rom adapter is an open source PCB design by erikarn, published on GitHub. It is a 2-layer board measuring 53.6 × 45.2 mm, with 11 components from 9 distinct parts.
Other key parts include the 28C256, 74LS20, 74LS138 and 74LS02. By type, the board carries 4 ICs, 3 connectors, 3 capacitors and 1 resistor.
It belongs with the rf & radio designs in this gallery.
From the project
playpen for radio pcbs
This is Adrian's playpen for learning and building little radio PCB projects.
All of these projects are licenced under CC BY-SA 2.0 (https://creativecommons.org/licenses/by-sa/2.0/). Please contact me if you have any commercial desires but don't wish to share your designs.
Main components on the Apple ii rom adapter
Apple ii rom adapter bill of materials (BOM)
11 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 28C256 | DIP-28_W15.24mm_Socket | U1 |
| 1 | 74LS20 | DIP-14_W7.62mm_Socket | U2 |
| 1 | 74LS138 | DIP-16_W7.62mm_Socket | U3 |
| 1 | 74LS02 | DIP-14_W7.62mm_Socket | U4 |
| 1 | ROMSEL | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | 9316 insert | DIP-24_W15.24mm_Socket | J2 |
| 1 | 74LS138 insert | DIP-16_W7.62mm_Socket | J3 |
| 3 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
Apple ii rom adapter design files
The KiCad project lives in the erikarn/radio-pcbs repository on GitHub; these links point at the commit this page was built from.
Apple ii rom adapter: common questions
How big is the Apple ii rom adapter PCB?
The Apple ii rom adapter measures 53.6 × 45.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Apple ii rom adapter?
11 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Apple ii rom adapter design files?
From the erikarn/radio-pcbs repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Apple ii rom adapter design in my own project?
The repository has no license, so all rights stay with erikarn. Use it as a reference, and ask the author before reusing the design.
More boards in radio-pcbs
630m xverter control v1
erikarn
100 × 71 mm48 parts2LNo license1Ubitx if board
erikarn
32.3 × 32.7 mm42 parts2LNo license1Xverter control board
erikarn
88.9 × 30.5 mm24 parts2LNo license1630m rx bpf
erikarn
114.8 × 81.8 mm22 parts2LNo license1Otrona attache psu v1
erikarn
90 × 99 mm17 parts2LNo license1Buffer audio amplifier
erikarn
50 × 50 mm16 parts2LNo license1Pcw video
erikarn
80 × 40 mm15 parts2LNo license1Receiver protection v1
erikarn
61 × 29.2 mm13 parts2LNo license1Apple ii-8t28-74ls245-adapter
erikarn
51.6 × 33.8 mm4 parts2LNo license1Apple ii-8t28-74ls245-adapter attempt 1
erikarn
5.6 × 15.8 mm4 parts2LNo license1
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Goodwatch20
travisgoodspeed
25.6 × 27.6 mm20 parts2LNo license568GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568Goodwatch31
travisgoodspeed
25.6 × 27.6 mm23 parts2LNo license568