Buffer audio amplifier
erikarn·radio-pcbs·buffer-audio-amplifier/buffer-audio-amplifier.kicad_pcb
About the Buffer audio amplifier PCB
Buffer audio amplifier is an open source PCB design by erikarn, published on GitHub. It is a 2-layer board measuring 50 × 50 mm, with 16 components from 14 distinct parts.
By type, the board carries 5 resistors, 4 capacitors, 3 connectors, 1 transistor and 1 inductor.
It belongs with the audio and rf & radio designs in this gallery.
From the project
playpen for radio pcbs
This is Adrian's playpen for learning and building little radio PCB projects.
All of these projects are licenced under CC BY-SA 2.0 (https://creativecommons.org/licenses/by-sa/2.0/). Please contact me if you have any commercial desires but don't wish to share your designs.
Buffer audio amplifier bill of materials (BOM)
16 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 2N3904 | TO-92_Inline | Q1 |
| 1 | PWR INOUT | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | OUTPUT | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | INPUT | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 2 | 10k | Potentiometer_Piher_PT-10-V05_Vertical | RV1, RV2 |
| 1 | 100u | L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 | L1 |
| 2 | 47u | CP_Radial_D6.3mm_P2.50mm | C1, C4 |
| 1 | 0.47u | CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 1u | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 820 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1 |
| 1 | 5.6k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | 22k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R3 |
| 1 | 2.2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R4 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
Buffer audio amplifier design files
The KiCad project lives in the erikarn/radio-pcbs repository on GitHub; these links point at the commit this page was built from.
Buffer audio amplifier: common questions
How big is the Buffer audio amplifier PCB?
The Buffer audio amplifier measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buffer audio amplifier?
16 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buffer audio amplifier design files?
From the erikarn/radio-pcbs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buffer audio amplifier design in my own project?
The repository has no license, so all rights stay with erikarn. Use it as a reference, and ask the author before reusing the design.
More boards in radio-pcbs
630m xverter control v1
erikarn
100 × 71 mm48 parts2LNo license1Ubitx if board
erikarn
32.3 × 32.7 mm42 parts2LNo license1Xverter control board
erikarn
88.9 × 30.5 mm24 parts2LNo license1630m rx bpf
erikarn
114.8 × 81.8 mm22 parts2LNo license1Otrona attache psu v1
erikarn
90 × 99 mm17 parts2LNo license1Pcw video
erikarn
80 × 40 mm15 parts2LNo license1Receiver protection v1
erikarn
61 × 29.2 mm13 parts2LNo license1Apple ii rom adapter
erikarn
53.6 × 45.2 mm11 parts2LNo license1Apple ii-8t28-74ls245-adapter
erikarn
51.6 × 33.8 mm4 parts2LNo license1Apple ii-8t28-74ls245-adapter attempt 1
erikarn
5.6 × 15.8 mm4 parts2LNo license1
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687