HardLabs

Procon gcc main

ESCA47·thingamaPRO·thingamaPRO_main/procon_gcc_main_pcb.kicad_pcb

Procon gcc main PCB layout, top view — open source RP2040/RP2350 board by ESCA47
Simulate this board

About the Procon gcc main PCB

Procon gcc main is an open source RP2040/RP2350 PCB design by ESCA47, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 110.9 × 59.5 mm, with 69 components from 36 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the 2x DRV5053CAQLPGM Hall Effect Sensors, Stickbox_Assembly, MCP3002, DRV5055A3QDBZR and W25Q128JVS. By type, the board carries 19 capacitors, 19 resistors, 11 ICs, 7 diodes, 6 connectors and 3 transistors.

From the project

Order at your own risk, even i fuck up too often. Maybe poke at me for help but for the most part you are on your own if you do decide to order these. This projecet was created to do the stupid thing I wanted and I got mine.

Order at your own risk, even i fuck up too often. Maybe poke at me for help but for the most part you are on your own if you do decide to order these. This projecet was created to do the stupid thing I wanted and I got mine.

Goals of the project is to give as one to one a switch pro feel for ultimate on a gcc/phob interface. Anything past that is a nice bonus(melee or people calibrating to their own prefrences).

Main components on the Procon gcc main

2x DRV5053CAQLPGM Hall Effect SensorsStickbox_AssemblyMCP3002DRV5055A3QDBZRW25Q128JVSXC6206PXXXMRRP2040

Procon gcc main bill of materials (BOM)

69 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
2x DRV5053CAQLPGM Hall Effect Sensors
U2
1
Stickbox_Assembly
U3
2
MCP3002
U6, U12
4
DRV5055A3QDBZR
DRV5055A2xDBZxQ1
U7, U8, U10, U11
1
W25Q128JVS
U9
1
XC6206PXXXMR
XC6206PxxxMR
U14
1
RP2040
U15
1
Q_PMOS_GDS
Q1
2
Q_NMOS_GSD
Q2, Q3
1
Crystal_GND3
Y1
2
Rumble
J1, J7
1
To Button Board
J3
1
Conn_01x06_Female
J4
1
Conn_01x03_Male
J6
1
USB_C_Receptacle
J9
1
Fuse
F1
1
BOOTSEL
S1
1
SW_DIP_x04
SW1
1
M7C
D1
2
MBR0520
D2, D8
Show 16 more
QtyPartRefs
4
1N4148
D_Small
D4, D5, D6, D7
4
100N
100n
C1, C9, C10, C11
2
1u
C2, C13
1
6.3V 47uF
C3
4
0.047U
0.047u
C15, C16, C17, C18
2
0.047U
0.047u
C19, C20
4
1u
C21, C31, C32, C33
2
10U
10u
C22, C23
3
10K
10k
R1, R3, R5
2
100R
R2, R4
4
10K
10k
R6, R7, R12, R13
2
5.1K
5.1k
R8, R9
1
1k
R14
4
2k
R15, R16, R17, R18
1
1k
R19
2
27R
27
R29, R30

Procon gcc main design files

The KiCad project lives in the ESCA47/thingamaPRO repository on GitHub; these links point at the commit this page was built from.

Procon gcc main: common questions

What microcontroller does the Procon gcc main use?

The Procon gcc main is built around the RP2040, from the RP2040/RP2350 family.

How big is the Procon gcc main PCB?

The Procon gcc main measures 110.9 × 59.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Procon gcc main?

69 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Procon gcc main design files?

From the ESCA47/thingamaPRO repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Procon gcc main design in my own project?

Yes, under the terms of its CERN-OHL-S-2.0 license, which ESCA47 chose for the repository.

Can I test firmware for the Procon gcc main without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in thingamaPRO

Similar boards