Starbie

Esther-365·Starbie·KiCad/Digital_pet_starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by Esther-365

About the Starbie PCB

Starbie is an open source ESP32 PCB design by Esther-365, published on GitHub. It is a 2-layer board measuring 109.5 × 87.5 mm, with 17 components from 15 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11 and AT42QT1011-TSHR. By type, the board carries 6 resistors, 4 connectors, 3 ICs, 2 switches and 2 capacitors.

It belongs with the displays & leds and sensors designs in this gallery.

From the project

This is my first hardware project and I'll be doing it with hack-life

Features • An OLED display to show the pet and its animations. • An MPU6050 to detect movement and shaking. • Two buttons for interacting with the pet. • A DHT11 to measure temperature and moisture. • A capacitive touch sensor so the pet can react to being touched. • Battery voltage monitoring so the pet can react when the battery is low. • USB power detection so the pet can have a different expression when plugged in.

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

17 components, 15 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
AT42QT1011-TSHR
U3
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
1
Conn_01x02_Pin
J3
1
Conn_01x01_Pin
J4
2
SW_Push
SW1, SW2
1
10nF
C1
1
100nF
C2
1
10k
R1
1
10kΩ
R2
2
200KΩ
R3, R4
1
100k
R5
1
150k
R6

Starbie design files

The KiCad project lives in the Esther-365/Starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 109.5 × 87.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

17 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the Esther-365/Starbie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with Esther-365. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards