Esp addressable led strip controller
About the Esp addressable led strip controller PCB
Esp addressable led strip controller is an open source ESP8266 PCB design by etronicskh, published on GitHub under the MIT license. It is a 2-layer board measuring 67 × 25 mm, with 23 components from 14 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 7 capacitors, 7 resistors, 4 connectors, 2 ICs, 1 transistor and 1 fuse.
It belongs with the displays & leds designs in this gallery.
From the project
PCB consist of ESP8266 for controlling Addressable LED Strip WS2812/WS2813, minimized to the smallest size.
Main components on the Esp addressable led strip controller
Esp addressable led strip controller bill of materials (BOM)
23 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP-12E | ESP-12E | U2 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | POWER | BarrelJack_CLIFF_FC681465S_SMT_Horizontal | J1 |
| 1 | Programmer | Harwin_M20-89006xx_1x06_P2.54mm_Horizontal | J2 |
| 1 | LED | JST_VH_B4PS-VH_1x04_P3.96mm_Horizontal | J3 |
| 1 | Micro_SD_Card | SUNTECH_ST-TF-003A | J4 |
| 1 | 1A | Fuse_1812_4532Metric | F1 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 2 | 22u | CP_EIA-3216-18_Kemet-A | C1, C3 |
| 4 | 0.1u | C_0603_1608Metric | C2, C4, C6, C7 |
| 1 | 1u | C_0805_2012Metric | C5 |
| 1 | 1k | R_0603_1608Metric | R1 |
| 6 | 10K | R_0603_1608Metric | R2, R3, R4, R5, R6, R7 |
Esp addressable led strip controller design files
The KiCad project lives in the etronicskh/esp8266-addressable-led-strip-controller repository on GitHub; these links point at the commit this page was built from.
Esp addressable led strip controller: common questions
What microcontroller does the Esp addressable led strip controller use?
The Esp addressable led strip controller is built around the ESP-12E, from the ESP8266 family.
How big is the Esp addressable led strip controller PCB?
The Esp addressable led strip controller measures 67 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Esp addressable led strip controller?
23 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp addressable led strip controller design files?
From the etronicskh/esp8266-addressable-led-strip-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Esp addressable led strip controller design in my own project?
Yes, under the terms of its MIT license, which etronicskh chose for the repository.
Can I test firmware for the Esp addressable led strip controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in esp8266-addressable-led-strip-controller
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398