Penelize esp led strip
About the Penelize esp led strip PCB
Penelize esp led strip is an open source ESP8266 PCB design by etronicskh, published on GitHub under the MIT license. It is a 2-layer board measuring 85 × 89 mm, with 39 components from 21 distinct parts.
Its main chip is the ESP-12E, from the ESP8266 family. Other key parts include the AMS1117-3.3. By type, the board carries 9 resistors, 7 capacitors, 6 connectors, 5 diodes, 4 transistors and 4 relays.
It belongs with the displays & leds designs in this gallery.
From the project
PCB consist of ESP8266 for controlling Addressable LED Strip WS2812/WS2813, minimized to the smallest size.
Main components on the Penelize esp led strip
Penelize esp led strip bill of materials (BOM)
39 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | ESP-12E | ESP-12E | U2 |
| 4 | S8050 | SOT-23 | Q1, Q2, Q3, Q4 |
| 1 | Conn_01x06 | Harwin_M20-89006xx_1x06_P2.54mm_Horizontal | J1 |
| 1 | Lamp1 | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Lamp3 | TerminalBlock_bornier-2_P5.08mm | J3 |
| 1 | AC Input | TerminalBlock_bornier-2_P5.08mm | J4 |
| 1 | Lamp2 | TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | Lamp4 | TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | 3A | Fuse_Littelfuse-LVR125 | F1 |
| 4 | ADW11 | SRSB_Relay | K1, K2, K3, K4 |
| 1 | HLK-PM03 | Converter_ACDC_HiLink_HLK-PMxx | PS1 |
| 1 | RED | LED_0805_2012Metric | D1 |
| 4 | M7 | D_SMA | D2, D3, D4, D5 |
| 1 | 1u | C_0603_1608Metric | C1 |
| 2 | 100n | C_0603_1608Metric | C2, C5 |
| 2 | 22u | CP_EIA-3216-18_Kemet-A | C3, C4 |
| 2 | 0.1u | C_0603_1608Metric | C6, C7 |
| 7 | 10k | R_0603_1608Metric | R1, R2, R3, R6, R7, R8, R9 |
| 1 | R_Small | R_0603_1608Metric | R4 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_0603_1608Metric | R5 |
Penelize esp led strip design files
The KiCad project lives in the etronicskh/esp8266-addressable-led-strip-controller repository on GitHub; these links point at the commit this page was built from.
Penelize esp led strip: common questions
What microcontroller does the Penelize esp led strip use?
The Penelize esp led strip is built around the ESP-12E, from the ESP8266 family.
How big is the Penelize esp led strip PCB?
The Penelize esp led strip measures 85 × 89 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Penelize esp led strip?
39 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Penelize esp led strip design files?
From the etronicskh/esp8266-addressable-led-strip-controller repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Penelize esp led strip design in my own project?
Yes, under the terms of its MIT license, which etronicskh chose for the repository.
Can I test firmware for the Penelize esp led strip without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in esp8266-addressable-led-strip-controller
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398