Remote
EwoudVV·clicker·remote/remote.kicad_pcb
About the Remote PCB
Remote is an open source ESP32 PCB design by EwoudVV, published on GitHub. It is a 2-layer board measuring 27.9 × 66.1 mm, with 12 components from 11 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the MCP73831T-2ATI/OT and AP2112K-3.3TRG1. By type, the board carries 3 ICs, 3 capacitors, 2 switches and 1 connector.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
wireless 2 switch macropad
This project is 2 pcbs. One is a reciever, which you plug into your computer, and the other is a remote, or transmitter, with the buttons. The reciever acts like a keyboard, so no drivers need to be installed on the computer.
Reciever pcb: - 2 layer - esp32 s3 - has a usb-c port for computer - an led that blinks when something is being sent
Remote pcb: - same esp32 s3 - small battery - 2 switches (khalih choc v1 smd) - 2 layer - 2 side assembly - usb-c port for charging
Main components on the Remote
Remote bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 ESP32-C3-WROOM-02 Espressif | ESP32-C3-WROOM-02 | U1 |
| 1 | MCP73831T-2ATI/OT MCP73831 Microchip | SOT-23-5 | U2 |
| 1 | AP2112K-3.3TRG1 AP2112K-3.3 Diodes Inc | SOT-23-5 | U3 |
| 1 | TYPE-C-31-M-12 USB-C HRO | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | DEBUG Generic | PinHeader_1x03_P2.54mm_Vertical | HDR1 |
| 2 | 5.1k | R_0603_1608Metric | R_CC1, R_CC2 |
| 1 | CPG135001D01 Choc1 Kailh | Choc_V1_PG1350 | SW1 |
| 1 | CPG135001D01 Choc2 Kailh | Choc_V1_PG1350 | SW2 |
| 1 | CL10B104KB8NNNC 100nF Samsung | C_0603_1608Metric | C1 |
| 1 | CL10A106MQ8NNNC 10uF Samsung | C_0603_1608Metric | C2 |
| 1 | CL10B105KO8NNNC 1uF Samsung | C_0603_1608Metric | C3 |
Remote design files
The KiCad project lives in the EwoudVV/clicker repository on GitHub; these links point at the commit this page was built from.
- Layoutremote/remote.kicad_pcb
- Schematicremote/remote.kicad_sch
- BOMremote/production/bom.csv
Remote: common questions
What microcontroller does the Remote use?
The Remote is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the Remote PCB?
The Remote measures 27.9 × 66.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Remote?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Remote design files?
From the EwoudVV/clicker repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Remote design in my own project?
The repository has no license, so all rights stay with EwoudVV. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Remote without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in clicker
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k