Wirx

Fanaperana·wirx·examples/chessboard.net

This repository ships a schematic but no board layout.

About the Wirx PCB

Wirx is an open source ESP32 PCB design by Fanaperana, published on GitHub under the MIT license. It is a board, with 970 components from 39 distinct parts.

Its main chip is the ESP32-WROOM-32D, from the ESP32 family. Other key parts include the AMS1117-3.3, 74HC238PW, CD4046B, SN74HC08PW and ULN2803A. By type, the board carries 400 resistors, 322 capacitors, 129 diodes, 64 inductors, 46 ICs and 5 connectors.

From the project

Schematic-as-code: describe a circuit in a small Rhai script; wirx checks it and lays out readable schematics for eleceda and KiCad

Schematic-as-code. In a small Rhai script you describe the parts, what connects to what, in what order, and which parts belong together. The compiler then:

- checks the circuit (names, pin types, power, PCB readiness), - lays out readable sheets: placement, grouping, wires, labels, power symbols, - writes them as an eleceda schematic (.esch), a KiCad netlist or SVG previews.

Main components on the Wirx

Wirx bill of materials (BOM)

970 components, 39 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
ESP32-WROOM-32D
U2
2
74HC238PW
U3, U4
1
CD4046B
U5
18
SN74HC08PW
U6, U7, U8, U9, U11, U12, U14, U15 +10
8
ULN2803A
U10, U13, U16, U19, U22, U25, U28, U31
9
CD4051B
U32, U33, U34, U35, U36, U37, U38, U39 +1
4
LMV358
U40, U41, U42, U43
1
ADS1115
U45
1
REF3312
U46
1
REGULATED 5V 2A
J1
1
3V3 UART ONLY
J2
1
VCO / DAC / GND
J3
1
ADC / GND
J4
1
SENSE / 1V25 / 0V625 / GND
J5
1
1.5A
F1
1
100k
RV1
1
RESET
SW1
1
BOOT
SW2
1
green
D1
Show 19 more
QtyPartRefs
64
BAT54S
D2, D4, D6, D8, D10, D12, D14, D16 +56
64
BAT54H
D3, D5, D7, D9, D11, D13, D15, D17 +56
64
100uH
L1, L2, L3, L4, L5, L6, L7, L8 +56
1
100uF
C1
113
100nF
C2, C5, C7, C9, C10, C11, C12, C14 +105
10
10uF
C3, C6, C19, C55, C91, C127, C163, C199 +2
1
22uF
C4
3
1uF
C8, C319, C321
1
100pF
C13
64
6.8nF
C21, C25, C29, C33, C37, C41, C45, C49 +56
64
1nF
C22, C26, C30, C34, C38, C42, C46, C50 +56
65
10nF
C23, C27, C31, C35, C39, C43, C47, C51 +57
1
2k2
R1
136
10k
R2, R3, R5, R6, R7, R9, R13, R14 +128
67
1k
R4, R8, R12, R18, R24, R30, R36, R42 +59
66
100k
R10, R15, R21, R27, R33, R39, R45, R51 +58
64
100
R11, R17, R23, R29, R35, R41, R47, R53 +56
64
47k
R16, R22, R28, R34, R40, R46, R52, R58 +56
2
4k7
R397, R398

Wirx design files

The KiCad project lives in the Fanaperana/wirx repository on GitHub; these links point at the commit this page was built from.

Wirx: common questions

What microcontroller does the Wirx use?

The Wirx is built around the ESP32-WROOM-32D, from the ESP32 family.

How many components are on the Wirx?

970 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wirx design files?

From the Fanaperana/wirx repository on GitHub, which has a netlist; the links under Design files point to each one.

Can I use the Wirx design in my own project?

Yes, under the terms of its MIT license, which Fanaperana chose for the repository.

Can I test firmware for the Wirx without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards