Radarriset
faoziaziz·radarriset
About the Radarriset PCB
Radarriset is an open source FPGA PCB design by faoziaziz, published on GitHub. It is a 2-layer board measuring 89.2 × 62.4 mm, with 124 components from 33 distinct parts.
Its main chip is the XC7A35T-FTG256, from the FPGA family. Other key parts include the LTC3569EUDC, MT41J128M16JT-125:KTR, FT2232HL, MT25QL128ABA1ESE-MSITTR and 93LC46BT-I/OT. By type, the board carries 82 capacitors, 33 resistors, 6 ICs, 1 transistor, 1 crystal and 1 diode.
Main components on the Radarriset
Radarriset bill of materials (BOM)
124 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XC7A35T-FTG256 | Xilinx_FTG256 | U1 |
| 1 | LTC3569EUDC | QFN-20_UDC_LIT | U2 |
| 1 | MT41J128M16JT-125:KTR | FBGA-96_L14.0-W8.0-R16-C6-P0.80-TL | U3 |
| 1 | FT2232HL | LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | MT25QL128ABA1ESE-MSITTR | SOP-8_L5.3-W5.3-P1.27-LS8.0-BL | U5 |
| 1 | 93LC46BT-I/OT | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-TL | U6 |
| 1 | MBT3904DW1 | SOT-363_SC-70-6 | Q1 |
| 1 | Crystal_GND24 | CRYSTAL-SMD_4P-L3.2-W2.5-BL | Y1 |
| 1 | LED | LED_0402_1005Metric | D1 |
| 6 | 20pF | C_0201_0603Metric | C1, C2, C3, C4, C5, C6 |
| 1 | 22uF | C_0402_1005Metric | C7 |
| 1 | 100uF | C_0805_2012Metric | C8 |
| 13 | 4.7uF | C_0201_0603Metric | C9, C10, C14, C17, C18, C24, C25, C31 +5 |
| 25 | 0.47uF | C_0201_0603Metric | C11, C12, C13, C15, C19, C20, C21, C26 +17 |
| 6 | 47uF | C_0603_1608Metric | C16, C22, C23, C30, C44, C51 |
| 28 | 0.1uF | C_0201_0603Metric | C37, C38, C39, C40, C41, C42, C43, C58 +20 |
| 2 | 8pF | C_0201_0603Metric | C70, C71 |
| 1 | 330R | R_0201_0603Metric | R1 |
| 5 | 4.7K | R_0201_0603Metric | R2, R3, R26, R27, R28 |
| 4 | 1K | R_0201_0603Metric | R4, R5, R6, R19 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 180K | R_0201_0603Metric | R8, R10, R12 |
| 3 | 57.6K | R_0201_0603Metric | R9, R11, R13 |
| 1 | 240R | R_0201_0603Metric | R14 |
| 1 | 3.48K | R_0201_0603Metric | R15 |
| 1 | 10K | R_0201_0603Metric | R16 |
| 4 | 100K | R_0201_0603Metric | R17, R20, R21, R22 |
| 1 | 0 | R_0201_0603Metric | R18 |
| 1 | 680 | R_0201_0603Metric | R23 |
| 2 | 100R | R_0201_0603Metric | R24, R25 |
| 2 | 4.7K | R_0402_1005Metric | R34, R37 |
| 2 | 1.8K | R_0402_1005Metric | R35, R36 |
| 1 | 2K | R_0402_1005Metric | R38 |
| 1 | 10K | R_0402_1005Metric | R39 |
Radarriset design files
The KiCad project lives in the faoziaziz/radarriset repository on GitHub; these links point at the commit this page was built from.
- LayoutrisetRadar.kicad_pcb
- SchematicrisetRadar.kicad_sch
Radarriset: common questions
What microcontroller does the Radarriset use?
The Radarriset is built around the XC7A35T-FTG256, from the FPGA family.
How big is the Radarriset PCB?
The Radarriset measures 89.2 × 62.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Radarriset?
124 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the Radarriset design files?
From the faoziaziz/radarriset repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Radarriset design in my own project?
The repository has no license, so all rights stay with faoziaziz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Radarriset without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765