3 open source boards using the XC7A35T-FTG256

Real designs built with the XC7A35T-FTG256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The XC7A35T-FTG256 in open source designs

The gallery holds 3 open source boards using the XC7A35T-FTG256 from 3 GitHub repositories; a typical one measures about 89.2 × 160 mm and carries around 405 components.

67% use four copper layers or more, and 0% carry an open source license.

The most starred is Scopefun hardware by OWON-LILLIPUT.

Microcontrollers on boards using the XC7A35T-FTG256

XC7A35T-FTG256: common questions

Where can I find a XC7A35T-FTG256 reference design?

Each of the 3 boards on this page is a real design using the XC7A35T-FTG256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the XC7A35T-FTG256?

The AD8337, ADA4817-1, ADA4932-1, AZ4558C and CYUSB3014 appear in the most repositories here.

Which microcontrollers do boards using the XC7A35T-FTG256 use?

Most are built on FPGA (3).

How big is a typical board using the XC7A35T-FTG256?

The median is 89.2 × 160 mm, and 33% are two-layer designs.

What is the most popular open source board using the XC7A35T-FTG256?

By GitHub stars, Scopefun hardware by OWON-LILLIPUT, with 6 stars.

Can I simulate one of these boards using the XC7A35T-FTG256 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part