2 open source boards using the MT41J128M16JT-125_KTR

Real designs built with the MT41J128M16JT-125_KTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The MT41J128M16JT-125_KTR in open source designs

The gallery holds 2 open source boards using the MT41J128M16JT-125_KTR from 2 GitHub repositories; a typical one measures about 76.6 × 53.9 mm and carries around 120 components.

50% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Minty-FPGA by techn1-cal.

Microcontrollers on boards using the MT41J128M16JT-125_KTR

MT41J128M16JT-125_KTR: common questions

Where can I find a MT41J128M16JT-125_KTR reference design?

Each of the 2 boards on this page is a real design using the MT41J128M16JT-125_KTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MT41J128M16JT-125_KTR use?

Most are built on FPGA (2).

How big is a typical board using the MT41J128M16JT-125_KTR?

The median is 76.6 × 53.9 mm, and 50% are two-layer designs.

What is the most popular open source board using the MT41J128M16JT-125_KTR?

By GitHub stars, Minty-FPGA by techn1-cal, with 2 stars.

Can I simulate one of these boards using the MT41J128M16JT-125_KTR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part