SmartCurtain
fedcr·SmartCurtain
About the SmartCurtain PCB
SmartCurtain is an open source ESP32 PCB design by fedcr, published on GitHub. It is a 2-layer board measuring 80.4 × 46 mm, with 19 components from 18 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the CH224K, TMC2209_StepStick and PC817. By type, the board carries 4 ICs, 3 capacitors, 2 connectors, 1 transistor and 1 LED.
It belongs with the robotics & motion and power & battery designs in this gallery.
From the project
Custom curtain automation controller powered by an ESP32, a TMC2209 stepper driver, and 12V USB-C Power Delivery negotiation, developed in KiCad for Hack Club's Half Life initiative.
Custom curtain automation controller powered by an ESP32, a TMC2209 stepper driver, and 12V USB-C Power Delivery negotiation, developed in KiCad for Hack Club's Half Life initiative.
The project overcomes the limitations of proprietary commercial smart curtain units by delivering an open, silent, cost-effective board powered by standard USB-C PD supplies and assembled using hand-solderable 0805 SMD passives and through-hole terminal blocks.
Main components on the SmartCurtain
SmartCurtain bill of materials (BOM)
19 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | CH224K | SSOP-10-1EP_3.9x4.9mm_P1mm_EP2.1x3.3mm | U2 |
| 1 | TMC2209_StepStick | Pololu_Breakout-16_15.2x20.3mm | U3 |
| 1 | PC817 | DIP-4_W7.62mm | U4 |
| 1 | Q_NPN_BCE | TO-92L_Inline | Q1 |
| 1 | Stepper | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | J1 |
| 1 | Mini360_Buck | PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | 1 kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 1 kΩ |
| 1 | 4.7 k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 4.7 k |
| 1 | 6.8 kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 6.8 kΩ |
| 1 | 10 kΩ | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 10 kΩ |
| 1 | 22 Ω - 47 Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 47 Ω |
| 1 | 470 Ω | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | 470 Ω |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | EC11 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal | RadarmmWave1 |
| 1 | LD271 | LED_D5.0mm_IRGrey | LD271 |
| 2 | C | C_Disc_D4.3mm_W1.9mm_P5.00mm | C4, C6 |
| 1 | 100nF | C_Disc_D4.3mm_W1.9mm_P5.00mm | C5 |
SmartCurtain design files
The KiCad project lives in the fedcr/SmartCurtain repository on GitHub; these links point at the commit this page was built from.
- LayoutSmartCurtain.kicad_pcb
- SchematicSmartCurtain.kicad_sch
- BOMSmartCurtain_BOM.csv
SmartCurtain: common questions
What microcontroller does the SmartCurtain use?
The SmartCurtain is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the SmartCurtain PCB?
The SmartCurtain measures 80.4 × 46 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SmartCurtain?
19 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SmartCurtain design files?
From the fedcr/SmartCurtain repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the SmartCurtain design in my own project?
The repository has no license, so all rights stay with fedcr. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the SmartCurtain without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k