Racer
felted67·racer-espressif·Racer-master/hardware/racer/racer.kicad_pcb
About the Racer PCB
Racer is an open source ESP32 PCB design by felted67, published on GitHub. It is a 4-layer board measuring 36 × 50.2 mm, with 69 components from 29 distinct parts.
Its main chip is the ESP32-H2-MINI-1, from the ESP32 family. Other key parts include the A3908, AP2204 and MCP73833. By type, the board carries 29 resistors, 17 capacitors, 8 diodes, 7 ICs, 4 connectors and 3 switches.
It belongs with the iot & wireless designs in this gallery.
From the project
thank you for the overwhelmingly positve support!! such an inspiration to keep making fun open source content!
thank you for the overwhelmingly positve support!! such an inspiration to keep making fun open source content!
https://github.com/StuckAtPrototype/Thumbtroller
These are structured into their own files. I could have used submodules, but decided against it.
This folder has all the python code you'd need to train up your own neural network for the car. It also consists scripts that let you drive it using a keyboard -- just in case you dont want to make a physical controller.

Main components on the Racer
Racer bill of materials (BOM)
69 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | A3908 | A3908 | U1, U2, U3, U4 |
| 1 | ESP32-H2-MINI-1 | MODULE_ESP32-H2-MINI-1-H2 | U5 |
| 1 | AP2204 | AP2204 | U6 |
| 1 | MCP73833 | SON50P300X300X100-11N | U7 |
| 1 | CONN_02X03_SMT Conn_02x03_SMT | PinHeader_2x03_P1.27mm_Vertical_SMD | J9 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | JST 2.0 BATT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J12 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | CUI_UJC-VP-3-SMT-TR | P1 |
| 1 | JS102011SAQN | SW_JS102011SAQN | S1 |
| 2 | TL4100AF240QG_ | SW_PTS810_SJM_250_SMTR_LFS | S2, S3 |
| 1 | TH 10k | R_0603_1608Metric | TH1 |
| 6 | LED | C_0603_1608Metric | D1, D2, D3, D4, D8, D9 |
| 1 | TPD1E10B06DPYR | D_SOD-523 | D5 |
| 1 | PWLED | D_0603_1608Metric | D6 |
| 6 | 10UF 10uF | C_0603_1608Metric | C1, C2, C5, C6, C15, C16 |
| 7 | 0.1UF 0.1uF | C_0603_1608Metric | C3, C4, C7, C8, C11, C12, C13 |
| 1 | 47UF 47uF | C_0603_1608Metric | C9 |
| 1 | 1uF 25V | C_0603_1608Metric | C10 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C14 |
| 1 | 22UF 22uF | C_0603_1608Metric | C17 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | 10K 10k | R_0603_1608Metric | R1, R3, R5, R7, R9, R10, R11, R30 |
| 4 | 30K 30k | R_0603_1608Metric | R2, R4, R6, R8 |
| 7 | 200 | R_0603_1608Metric | R12, R13, R14, R15, R20, R21, R25 |
| 1 | 1M | R_0603_1608Metric | R16 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R17, R18 |
| 1 | 5K1 1.43K | R_0603_1608Metric | R22 |
| 1 | 1.43K | R_0603_1608Metric | R23 |
| 1 | 75K | R_0603_1608Metric | R24 |
| 4 | 100K 100k | R_0603_1608Metric | R26, R27, R28, R29 |
Racer design files
The KiCad project lives in the felted67/racer-espressif repository on GitHub; these links point at the commit this page was built from.
Racer: common questions
What microcontroller does the Racer use?
The Racer is built around the ESP32-H2-MINI-1, from the ESP32 family.
How big is the Racer PCB?
The Racer measures 36 × 50.2 mm, has 4 copper layers and is 1.66 mm thick.
How many components are on the Racer?
69 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Racer design files?
From the felted67/racer-espressif repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Racer design in my own project?
The repository has no license, so all rights stay with felted67. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Racer without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in racer-espressif
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k