Controller
felted67·racer-espressif·Thumbtroller-master/hardware/controller.kicad_pcb
About the Controller PCB
Controller is an open source ESP32 PCB design by felted67, published on GitHub. It is a 4-layer board measuring 29 × 74 mm, with 58 components from 28 distinct parts.
Its main chip is the ESP32-H2-MINI-1, from the ESP32 family. Other key parts include the THB001P, AP2204 and MCP73833. By type, the board carries 23 resistors, 13 capacitors, 7 diodes, 6 switches, 4 ICs and 4 connectors.
It belongs with the iot & wireless designs in this gallery.
From the project
https://github.com/StuckAtPrototype/Racer

Main components on the Controller
Controller bill of materials (BOM)
58 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | THB001P | CNK_THB001P | U1 |
| 1 | ESP32-H2-MINI-1 | MODULE_ESP32-H2-MINI-1-H2 | U5 |
| 1 | AP2204 | AP2204 | U6 |
| 1 | MCP73833 | SON50P300X300X100-11N | U7 |
| 1 | Chip Enable | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | UART | PinHeader_1x04_P2.54mm_Vertical | J11 |
| 1 | JST 2.0 BATT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J12 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | GCT_USB4105-GF-A | P1 |
| 1 | JS102011SAQN | SW_JS102011SAQN | S1 |
| 5 | TL4100AF240QG_ | SW_PTS810_SJM_250_SMTR_LFS | S2, S3, S4, S5, S6 |
| 1 | TH 10k | R_0603_1608Metric | TH1 |
| 5 | LED | C_0603_1608Metric | D1, D2, D3, D8, D9 |
| 1 | TPD1E10B06DPYR | D_SOD-523 | D5 |
| 1 | PWLED | D_0603_1608Metric | D6 |
| 5 | 1uF 25V | C_0603_1608Metric | C1, C2, C3, C4, C10 |
| 1 | 47UF 47uF | C_0603_1608Metric | C9 |
| 3 | 0.1UF 0.1uF | C_0603_1608Metric | C11, C12, C13 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C14 |
| 2 | 10UF 10uF | C_0603_1608Metric | C15, C16 |
| 1 | 22UF 22uF | C_0603_1608Metric | C17 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 200 | R_0603_1608Metric | R1, R12, R13, R25 |
| 7 | 10K 10k | R_0603_1608Metric | R2, R4, R6, R8, R9, R10, R11 |
| 4 | 100K 100k | R_0603_1608Metric | R3, R5, R7, R14 |
| 1 | 1M | R_0603_1608Metric | R16 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R17, R18 |
| 2 | 470 | R_0603_1608Metric | R20, R21 |
| 2 | 1.43K | R_0603_1608Metric | R22, R23 |
| 1 | 75K | R_0603_1608Metric | R24 |
Controller design files
The KiCad project lives in the felted67/racer-espressif repository on GitHub; these links point at the commit this page was built from.
Controller: common questions
What microcontroller does the Controller use?
The Controller is built around the ESP32-H2-MINI-1, from the ESP32 family.
How big is the Controller PCB?
The Controller measures 29 × 74 mm, has 4 copper layers and is 1.66 mm thick.
How many components are on the Controller?
58 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Controller design files?
From the felted67/racer-espressif repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Controller design in my own project?
The repository has no license, so all rights stay with felted67. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in racer-espressif
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k