16 open source boards using the ESP32-H2-MINI-1

Real designs built with the ESP32-H2-MINI-1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the ESP32-H2-MINI-1

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the ESP32-H2-MINI-1 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 10 of 12 designs, most often 10 kΩ.
  • The EN pin has a capacitor to GND on 10 of 12 designs, most often 1 µF (then 100 nF).
  • The IO08 pin has a pull-up to 3.3V on 9 of 12 designs, most often 10 kΩ.
  • The 3V3 pin is tied to 3.3V on 10 of 12 designs (a signal on 2).
GNDpin 1, 2, 11, 14, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 50, 51, 52, 53Connected to: GND 91%
3V3pin 3Connected to: 3.3V 83% · a signal 17%
NCpin 4, 7, 17, 28, 29, 32, 33, 34, 35Connected to: Not connected 97%
IO2pin 5Connected to: Signal 67% · not connected 33%
  • Series resistor on 33% · 10 kΩ (4)
  • Resistor to GND on 33% · 10 kΩ (3), 1.43 kΩ (1)
IO3pin 6Connected to: Not connected 67% · a signal 33%
ENpin 8Connected to: Signal 92%
  • Pull-up to 3.3V on 83% · 10 kΩ (10)
  • Capacitor to GND on 83% · 1 µF (10), 100 nF (8)
VBATpin 15Connected to: 3.3V 67% · not connected 25%
  • Decoupling capacitor on 58% · 100 nF (7)
IO12pin 16Connected to: Not connected 83% · a signal 17%
IO4pin 18Connected to: A3908 25% · not connected 25%
  • Resistor to GND on 42% · 10 kΩ (4), 1.43 kΩ (1)
IO5pin 19Connected to: A3908 25% · not connected 25%
  • Resistor to GND on 42% · 10 kΩ (4), 100 kΩ (1)
IO11pin 21Connected to: Signal 58% · not connected 42%
  • Series resistor on 33% · 10 kΩ (3), 180 Ω (1)
IO08pin 22Connected to: Signal 75% · not connected 25%
  • Pull-up to 3.3V on 75% · 10 kΩ (9)
IO25pin 25Connected to: Signal 92%
  • Pull-up to 3.3V on 67% · 10 kΩ (8)
IO26pin 26Connected to: A connector 58%
  • Series resistor on 42% · 22 Ω (4), 200 Ω (1)
IO27pin 27Connected to: A connector 58%
  • Series resistor on 33% · 22 Ω (3), 200 Ω (1)
EPADpin 49Connected to: GND 92%

9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Racer by StuckAtPrototype, AirCube by StuckAtPrototype, PCB business card remake by StuckAtPrototype and Focus bar panel v1 by StuckAtPrototype.

The ESP32-H2-MINI-1 in open source designs

The gallery holds 16 open source boards using the ESP32-H2-MINI-1 from 12 GitHub repositories; a typical one measures about 47 × 65.8 mm and carries around 62 components.

56% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.

The most starred is Racer by StuckAtPrototype.

Microcontrollers on boards using the ESP32-H2-MINI-1

What boards using the ESP32-H2-MINI-1 are built for

ESP32-H2-MINI-1: common questions

Where can I find a ESP32-H2-MINI-1 reference design?

Each of the 16 boards on this page is a real design using the ESP32-H2-MINI-1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-H2-MINI-1 EN pin?

The EN pin has a pull-up to 3.3V on 10 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the ESP32-H2-MINI-1.

What pull-up resistor is used on the ESP32-H2-MINI-1 IO08 pin?

The IO08 pin has a pull-up to 3.3V on 9 of 12 designs, most often 10 kΩ. Counted from the KiCad layouts of 12 open source designs using the ESP32-H2-MINI-1.

How is the ESP32-H2-MINI-1 3V3 pin connected?

The 3V3 pin is tied to 3.3V on 10 of 12 designs (a signal on 2). Counted from the KiCad layouts of 12 open source designs using the ESP32-H2-MINI-1.

What parts are used alongside the ESP32-H2-MINI-1?

The A3908, AP2205, MCP73833, TPS631000DRLR and AP2204 appear in the most repositories here.

Which microcontrollers do boards using the ESP32-H2-MINI-1 use?

Most are built on ESP32 (16).

How big is a typical board using the ESP32-H2-MINI-1?

The median is 47 × 65.8 mm, and 56% are two-layer designs.

What is the most popular open source board using the ESP32-H2-MINI-1?

By GitHub stars, Racer by StuckAtPrototype, with 3,798 stars.

Can I simulate one of these boards using the ESP32-H2-MINI-1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part