ZEGAR-ESP32
Fese673·ZEGAR-ESP32·hardware/kicad/ESP32C3-CC1101/ESP32C3-CC1101.kicad_pcb
About the ZEGAR-ESP32 PCB
ZEGAR-ESP32 is an open source ESP32 PCB design by Fese673, published on GitHub. It is a 2-layer board measuring 54.1 × 21.9 mm, with 45 components from 27 distinct parts.
Its main chip is the ESP32-C3-WROOM-02-N4, from the ESP32 family. Other key parts include the TLV62568DBVR and CC1101RGP. By type, the board carries 22 capacitors, 8 resistors, 5 inductors, 4 diodes, 3 ICs and 2 connectors.
It belongs with the rf & radio, iot & wireless and sensors designs in this gallery.
From the project
Główny projekt zegara , dyspozytora dla innych projektów. Został wykonany w oparciu o mcu ESP32WROOM32D oraz czujniki ENS160, BMP280, PMS5003, AHT21. Dodatkowo dochodzi jeszcze DAC
Firmware zegara ESP32 z Bluetooth A2DP, WiFi/MQTT, czujnikami i wyświetlaczem LCD 20x4 + enkoderem oraz zewnętrznym wyświetlaczem HMI Guition ESP32-S3 JC8048W550c.
- Mikrokontroler: ESP32-WROOM-32D - Wyświetlacz: LCD 20x4 (I2C 0x27) + enkoder obrotowy - Czujniki: PMS5003 (PM), ENS160+AHT21 (CO₂/temp), BMP280 (ciśnienie), DS3231 (RTC) - Audio: BT A2DP Sink → I2S DAC + buzzer na GPIO - Komunikacja zewnętrzna: Guition HMI (UART/COBS)
Main components on the ZEGAR-ESP32
ZEGAR-ESP32 bill of materials (BOM)
45 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3-WROOM-02-N4 | ESP32C3WROOM02N4 | IC1 |
| 1 | TLV62568DBVR | TLV62568DBVR | IC2 |
| 1 | CC1101RGP | CC1101RGP | U1 |
| 1 | NX3225GA-26.000MHZ-EXS00A-CG01972 NX3225GA-26MHZ | NX3225GA16000MSTDCRG1 | Y1 |
| 1 | 73251-1290 | Molex-SD-73251-129 | J1 |
| 1 | USB4105-GF-A | GCT_USB4105-GF-A | J2 |
| 3 | CPDQ5V0-HF | SODFL1006X40N | D1, D2, D3 |
| 1 | B5819W-TP | SOD3716X135N | D4 |
| 3 | 27NH 27nH | L_Murata_LQG_0402 | L1, L3, L4 |
| 1 | 22NH 22nH | L_Murata_LQG_0402 | L2 |
| 1 | 2.2UH 2.2uH | ASPI0418FS | L5 |
| 3 | 100NF 100nF | Cap_Murata_GRM_0402 | C1, C10, C16 |
| 2 | 27PF 27pF | Cap_Murata_GRM_0402 | C2, C3 |
| 2 | 3.9PF 3.9pF | Cap_Murata_GRM_0402 | C4, C7 |
| 5 | 220PF 220pF | Cap_Murata_GRM_0402 | C5, C6, C11, C12, C13 |
| 1 | 8.2PF 8.2pF | Cap_Murata_GRM_0402 | C8 |
| 1 | 5.6PF 5.6pF | Cap_Murata_GRM_0402 | C9 |
| 2 | 10NF 10nF | Cap_Murata_GRM_0402 | C14, C15 |
| 3 | 10UF 10uF | Cap_Murata_GRM_0402 | C17, C20, C21 |
| 1 | 1UF 1uF | Cap_Murata_GRM_0402 | C18 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 6.8PF 6.8pF | Cap_Murata_GRM_0402 | C19 |
| 1 | 4.7UF 4.7uF | Cap_Murata_GRM_0603 | C22 |
| 1 | 56K 56k | R_KOA_RK_0402 | R1 |
| 3 | 10K 10k | R_Vishay_CRCW_0402 | R2, R3, R8 |
| 2 | 5K1 5k1 | R_Vishay_CRCW_0402 | R4, R5 |
| 1 | 442K 442k | R_Bourns_CR_0603 | R6 |
| 1 | 97.6K 97.6k | R_Bourns_CR_0603 | R7 |
ZEGAR-ESP32 design files
The KiCad project lives in the Fese673/ZEGAR-ESP32 repository on GitHub; these links point at the commit this page was built from.
ZEGAR-ESP32: common questions
What microcontroller does the ZEGAR-ESP32 use?
The ZEGAR-ESP32 is built around the ESP32-C3-WROOM-02-N4, from the ESP32 family.
How big is the ZEGAR-ESP32 PCB?
The ZEGAR-ESP32 measures 54.1 × 21.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ZEGAR-ESP32?
45 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ZEGAR-ESP32 design files?
From the Fese673/ZEGAR-ESP32 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ZEGAR-ESP32 design in my own project?
The repository has no license, so all rights stay with Fese673. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ZEGAR-ESP32 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k