18 open source boards using the TLV62568DBVR

Real designs built with the TLV62568DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

18 boardsClear filters|Most starred

How designs wire the TLV62568DBVR

Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the TLV62568DBVR connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a inductor on 13 of 14 designs, most often 2.2 µH (then 1 µH).
  • The VIN pin has a decoupling capacitor on 12 of 14 designs, most often 4.7 µF (then 10 µF).
  • The FB pin has a resistor to GND on 12 of 14 designs, most often 100 kΩ (then 97.6 kΩ).
  • The FB pin has a pull-up to 3.3V on 9 of 14 designs, most often 442 kΩ (then 450 kΩ).
ENpin 1Connected to: Signal 57% · 5V 43%
  • Capacitor to GND on 57% · 4.7 µF (6), 10 µF (3), 100 nF (2)
GNDpin 2Connected to: GND 93%
SWpin 3Connected to: Signal 93%
  • Inductor on 93% · 2.2 µH (10), 1 µH (1), 10 µH (1)
VINpin 4Connected to: 5V 64% · a signal 36%
  • Decoupling capacitor on 86% · 4.7 µF (8), 10 µF (5), 100 nF (2)
FBpin 5Connected to: Signal 93%
  • Resistor to GND on 86% · 100 kΩ (5), 97.6 kΩ (2), 22.1 kΩ (1)
  • Pull-up to 3.3V on 64% · 442 kΩ (2), 450 kΩ (1), 470 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S3 M.2 Board by ItsNotDaan, CoralWave by mineiwik, ESP+Power Only by aaronluebbert and ClearBell Inneneinheit by akoerner-dev.

The TLV62568DBVR in open source designs

The gallery holds 18 open source boards using the TLV62568DBVR from 14 GitHub repositories; a typical one measures about 83.6 × 75.4 mm and carries around 86 components.

61% use four copper layers or more, and 56% carry an open source license.

The most starred is ESP32S3 M.2 Board by ItsNotDaan.

Microcontrollers on boards using the TLV62568DBVR

TLV62568DBVR: common questions

Where can I find a TLV62568DBVR reference design?

Each of the 18 boards on this page is a real design using the TLV62568DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV62568DBVR SW pin connected?

The SW pin has a inductor on 13 of 14 designs, most often 2.2 µH (then 1 µH). Counted from the KiCad layouts of 14 open source designs using the TLV62568DBVR.

What decoupling capacitors do designs use on the TLV62568DBVR VIN pin?

The VIN pin has a decoupling capacitor on 12 of 14 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 14 open source designs using the TLV62568DBVR.

What resistor goes on the TLV62568DBVR FB pin?

The FB pin has a resistor to GND on 12 of 14 designs, most often 100 kΩ (then 97.6 kΩ). Counted from the KiCad layouts of 14 open source designs using the TLV62568DBVR.

What parts are used alongside the TLV62568DBVR?

The USBLC6-2SC6, W25Q128JVSIQ, CC1101RGP, ESP32-C3-WROOM-02-N4 and MAX98357AETE+T appear in the most repositories here.

Which microcontrollers do boards using the TLV62568DBVR use?

Most are built on ESP32 (13), FPGA (2) and RP2040/RP2350 (2).

How big is a typical board using the TLV62568DBVR?

The median is 83.6 × 75.4 mm, and 39% are two-layer designs.

What is the most popular open source board using the TLV62568DBVR?

By GitHub stars, ESP32S3 M.2 Board by ItsNotDaan, with 8 stars.

Can I simulate one of these boards using the TLV62568DBVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part