Rj45-screw terminals
About the Rj45-screw terminals PCB
Rj45-screw terminals is an open source PCB design by festlv, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 34 × 37 mm, with 3 components from 3 distinct parts.
It belongs with the robotics & motion designs in this gallery.
From the project
Hardware design for modular CNC controller
rioctrl is modular open source CNC controller hardware for riocore.
It consists of a main FPGA controller board which has 6 slots for various input/output modules.
At this time, the following modules have been designed:
rioctrl-controller: Lattice ECP5 based controller board rioctrl-stepdir4: 4 axis step/dir output interface rioctrl-quadenc4: 4 axis quadrature encoder (ABZ) input rioctrl-shifio: 16 digital inputs, 16 digital outputs (PNP) breakouts/lichuan-lc10: breakout board that allows connecting Lichuan LC10 series servo to stepdir4 and quadenc4 module (via off-the-shelf RJ45 cables)…
Rj45-screw terminals bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | R-RJ45R08P-C000 RJ45_LED_Shielded Ckmtw(Shenzhen Cankemeng) | R-RJ45R08P-C000 | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | MX250-3.5-08P-B-GY01-Cu-A TERM-BLK-8H-S MAX | MX250-3.5-08P-B | J3 |
Rj45-screw terminals design files
The KiCad project lives in the festlv/rioctrl-hw repository on GitHub; these links point at the commit this page was built from.
Rj45-screw terminals: common questions
How big is the Rj45-screw terminals PCB?
The Rj45-screw terminals measures 34 × 37 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rj45-screw terminals?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rj45-screw terminals design files?
From the festlv/rioctrl-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rj45-screw terminals design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which festlv chose for the repository.
More boards in rioctrl-hw
RP2040/RP2350Rioctrl controller
190 × 100 mm260 parts4LCERN-OHL-S-2.016
Rioctrl shiftio
100 × 100 mm137 parts2LCERN-OHL-S-2.016
Rioctrl quadenc4
100 × 100 mm117 parts2LCERN-OHL-S-2.016
Rioctrl stepdir4
100 × 100 mm94 parts2LCERN-OHL-S-2.016
Rioctrl spindle
100 × 100 mm82 parts2LCERN-OHL-S-2.016
Lichuan lc10
40.5 × 78 mm5 parts2LCERN-OHL-S-2.016
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Mesabob
rene-dev
87.5 × 50 mm44 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979