HardLabs

Fire-24-f

fezzo2003·onerom-honda·hardware/pcb/verified/fire-24-f/fire-24-f.kicad_pcb

Fire-24-f PCB layout, top view — open source RP2040/RP2350 board by fezzo2003

About the Fire-24-f PCB

Fire-24-f is an open source RP2040/RP2350 PCB design by fezzo2003, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 18.3 × 31.3 mm, with 44 components from 20 distinct parts.

Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the 2332/2364 SOCKET, AP2112K-3.3 and USBLC6-2P6. By type, the board carries 19 capacitors, 11 resistors, 4 ICs, 4 connectors, 4 diodes and 1 crystal.

From the project

A second USB-C variant, retaining the RP2354A MCU.

A second USB-C variant, retaining the RP2354A MCU.

Changes from fire-24-e: - Adds a neo-pixel LED, sharing GPIO 29 with the status LED. - SEL pins have been swapped around for consistency with the latest 28, 32 and 40 pin designs. The two right-most SEL pins are now ADC (non-5V tolerant) pins, with the othe two being 5V tolerant. - A fraction of a mm narrower and shorter.

Main components on the Fire-24-f

RP2350_60QFN2332/2364 SOCKETAP2112K-3.3USBLC6-2P6

Fire-24-f bill of materials (BOM)

44 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RP2350_60QFN
U1
1
2332/2364 SOCKET
U2
1
AP2112K-3.3
U3
1
USBLC6-2P6
U4
1
CRYSTAL_GND24
Crystal_GND24
Y1
2
Conn_01x02_Pin
J1, J3
1
Conn_02x04_Odd_Even
J2
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J4
1
C25503345
LED_Small
D1
2
1N5819WS
D2, D3
1
XL-1010RGBC-WS2812B
D4
1
3.3U
3.3u
L1
5
4.7UF
4.7uF
C1, C2, C7, C13, C15
10
0.1UF
0.1uF
C3, C4, C5, C6, C8, C9, C10, C11 +2
2
4.7UF
4.7uF
C16, C17
2
15PF
15pF
C18, C19
4
10K
R1, R3, R7, R8
4
1K
R2, R5, R6, R11
1
33R
R4
2
5K1
R9, R10

Fire-24-f design files

The KiCad project lives in the fezzo2003/onerom-honda repository on GitHub; these links point at the commit this page was built from.

Fire-24-f: common questions

What microcontroller does the Fire-24-f use?

The Fire-24-f is built around the RP2350_60QFN, from the RP2040/RP2350 family.

How big is the Fire-24-f PCB?

The Fire-24-f measures 18.3 × 31.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fire-24-f?

44 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fire-24-f design files?

From the fezzo2003/onerom-honda repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fire-24-f design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which fezzo2003 chose for the repository.

Can I test firmware for the Fire-24-f without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in onerom-honda

Similar boards